Flashers and Tower Lighting Controls Flashers FS100 SERIES Medium Power Flasher Description The FS100 Series (medium power) may be used to control inductive, incandescent, or resistive loads. Input voltages of 24, 120, or 230VAC are available. Fixed flash rates in stock range from 30, 50, 60, and 90 FPM, with custom flash rates ranging from 10 to 300 FPM. Encapsulation provides protection against shock, vibration, and humidity. This group of solid-state flashers has proven reliability with years of use throughout the world. Operation Upon application of input voltage, the T2 OFF time begins. At the end of the OFF time, the T1 ON time begins and the load energizes. At the end of T1, T2 begins and the load de-energizes. This cycle repeats until input voltage is removed. Reset: Removing input voltage resets the output and the sequence to T2. Wiring Diagram Features & Benefits L1 N/L2 FEATURES BENEFITS 3A steady, 30A Provides direct control of inductive, incandescent, or inrush current resistive loads No moving parts to arc and wear out over time and Totally solid state encapsulated to protect against shock, vibration, and encapsulated and humidity Accessories V = Voltage P1023-6 Mounting bracket L = Load The 90 orientation of mounting slots makes installation/removal of modules quick and easy. P1015-64 (AWG 14/16) Female Quick Connect These 0.25 in. (6.35 mm) female terminals are constructed with an insulator barrel to provide strain relief. P1015-18 Quick Connect to Screw Adapter Ordering Information Screw adapter terminal designed for use with all modules with 0.25 in. (6.35 mm) male quick MODEL INPUT FLASH RATE connect terminals. FS143 24VAC 90 FPM C103PM (AL) DIN Rail FS152 120VAC 90 FPM 35 mm aluminum DIN rail available in a 36 in. FS152-30 120VAC 30 FPM (91.4 cm) length. FS152-60 120VAC 60 FPM P1023-20 DIN Rail Adapter FS162 230VAC 90 FPM Allows module to be mounted on a 35 mm DIN FS162-30 230VAC 30 FPM type rail with two 10 screws. If you dont find the part you need, call us for a custom product 800-843-8848 Specifications 2016 Littelfuse Protection Relays & Controls Rev: 1-A-062316 www.littelfuse.com/fs100medFlashers and Tower Lighting Controls Flashers FS100 SERIES Specifications Flasher Function Diagram Technical Data Operation OFF/ON solid-state flasher (continuous duty) V = Voltage FLASHER (OFF FIRST) Flash Rate Fixed at 90 FPM 10% R = Reset Custom Flash Rates 10 - 300 FPM 10% L = Load ON/OFF Ratio 50% T1 = ON Time T2 = OFF Time Input T1 T2 Voltage/Frequency 24, 120, or 230VAC 15% / 50/60 Hz Output Load Type Inductive, resistive, or incandescent Output Fullwave AC, solid state, SPST Maximum Load Rating 3A steady state Inrush 10 times steady state current Mechanical Mounting Surface mount with one 10 (M5 x 0.8) screw Dimensions H 50.8 mm (2) W 50.8 mm (2) D 30.7 mm (1.21) Termination 0.25 in. (6 .35 mm) male quick connect terminals Protection Circuitry Encapsulated Environmental Operating/Storage Temperature -20 to 60C / -40 to 85C Weight 2.2 oz (62 g) 2016 Littelfuse Protection Relays & Controls Rev: 1-A-062316 www.littelfuse.com/fs100med