AEK-CON-BSPOTV1 STMicroelectronics

AEK-CON-BSPOTV1 Data brief Blind-spot educational tool connector board with EV-VN7xxx connector Features Host connector for EV-VN7xxx board type 3 pins available for Hall sensor connection Side connector for LED string driving Two connectors on the under side to supply the system and the AEK- LED-21DISM1 LED driving board 8-pin connector for AEKD-BLINDSPOTA1: 2 pins for DC motor driving 2 pins for LED driving 3 pins for Hall sensor connection Part of the AutoDevKit initiative RoHS compliant Description The AEK-CON-BSPOTV1 board is principally a connector board for the Blind-spot Educational Tool actuators and loads. It conveniently arranges all the wire connections from the AEKD-BLINDSPOTA1 into a single 8-pin connector, and has another connector for the EV-VN7050AS board that drives a DC geared motor for the conveyor belt. Finally, the board simplifies power connection between the boards and signal transfer from the LED driving board AEK-LED-21DISM1 and the Hall sensor. The Blind-spot detection and warning educational tool is designed help developers to become familiar with AutoDevKit based development. The AEKD-BLINDSPOTA1 kit Product summary is a hardware assembly set with all required loads for the specific application, and the AEKD-BLINDSPOTB1 set consists of electronic boards to control the entire system. Blind-spot educational tool connector board AEK-CON- Blind-spot detection is simulated through magnetic field detection by means of a Hall with EV-VN7 BSPOTV1 sensor mounted on a stationary car and magnets mounted inside another car placed connector on the conveyor belt moved by a 12 V DC gearbox motor with 40 RPM and very high Blind-spot board AEK- torque. panel BLINDSPOTB1 The entire tool will help you develop the skills to build the firmware to control the Blind-spot detection AEK- system triggers using SPC5-Studio extended with AutoDevKit plugin. You can simulation kit BLINDSPOTA1 compare your resulting code with source code provided in the AutoDevKit plugin, and system functionality can be tested by downloading the STSW-BLINDSPOT Firmware for AEKD- STSW- BLINDSPOTB1 BLINDSPOTB1 SPC58EC firmware. VN7050AS evaluation board based on EV-VN7050AS VIPower M0-7 technology Digitally controlled LED driver board for AEK- automotive lighting LED-21DISM1 applications DB4197 - Rev 1 - June 2020 www.st.com For further information contact your local STMicroelectronics sales office.AEK-CON-BSPOTV1 1 Block diagrams and schematic diagrams 1.1 Block diagram Figure 1. Block diagram DB4197 - Rev 1 page 2/8