ESDZV5-1BV2 Datasheet Ultra-low clamping single line bidirectional ESD protection in extra-small 01005 package Features Ultra-low clamping voltage: +/-7 V IEC 61000-4-2 8 kV contact discharge at 30 ns Bidirectional device Low leakage current 01005 package ECOPACK2 compliant component ESD / transient protection according to: IEC61000-4-2 (ESD): 15kV / 25kV contact / air discharge IEC61000-4-4 (EFT): 40A IEC61000-4-5 (surge): 5A Applications Where transient overvoltage protection in ESD sensitive equipment is required, such as: Smartphones, mobile phone and accessories Tablet and notebooks Portable multimedia devices and accessories Wearable, home automation, healthcare Highly integrated systems Product status Description ESDZV5-1BV2 Bidirectional single line TVS diode designed to protect the data lines or other I/O ports against ESD transients. The ESDZV5-1BV2 is the smallest and most efficient 15 kV ESD protection, ideal for applications where both reduced line capacitance, board space saving and high ESD protection levels are required. DS12222 - Rev 4 - December 2020 www.st.com For further information contact your local STMicroelectronics sales office.ESDZV5-1BV2 Characteristics 1 Characteristics Table 1. Absolute maximum ratings Symbol Parameter Value Unit IEC 61000-4-2: V PP Peak pulse voltage Contact discharge 15 kV Air discharge 25 I Peak pulse current 5 A PP 8/20s P Peak pulse power 45 W PP T Storage junction temperature range -65 to +150 stg C T Maximum operating junction temperature -40 to +150 j T Maximum temperature for soldering during 10 s 260 C L Figure 1. Electrical characteristics (definitions) I Symbol Parameter R D V Stand-off voltage RM V Clamping voltage CL V Holding voltage H V V V V V CL Trig BR RM I Leakage current at V RM RM I RM I Peak pulse current PP V Triggering voltage Trig C Input capacitance per line I line R R Dynamic resistance D I PP Table 2. Electrical characteristics (T = 25 C) amb Symbol Test conditions Min. Typ. Max. Unit V Higher voltage than V guarantees the protection turn-on 5.8 8.5 V Trig TRIG (1) I V = 5.5 V 100 nA RM RM R Pulse duration 100 ns 0.18 D V 8 kV contact discharge after 30 ns, IEC 61000-4-2 7 V CL C F = 1 MHz, V = 30 mV 5 6 pF line OSC V Lower voltage than V guarantees the protection turn-off 4 4.3 4.8 V H H 1. Application note: When used to protect a line connected to a DC source, the DC voltage must be lower than the minimum V to enable the diode to return to its non-conducting state after the transient. H DS12222 - Rev 4 page 2/10