L99DZ100GPTR STMicroelectronics

L99DZ100G, L99DZ100GP Automotive door module with LIN and HS-CAN (L99DZ100G) or HS-CAN supporting selective wake up (L99DZ100GP) Datasheet - production data All the embedded outputs come with protection and supervision features: Current Monitor (high-side only) Open-load Overcurrent Thermal warning Thermal shutdown Fully protected driver for external MOSFETs in H-bridge configuration or dual Half bridge Features configuration Fully protected driver for external high-side AEC Q100 compliant qualified MOSFET 1 half bridge for 7.5 A load (R = 100 m ) ON Control block for electro-chromic element 1 half bridge for 7.5 A load (R = 150 m ) ON Two 5 V voltage regulators for microcontroller 2 half bridges for 0.5 A load (R = 2000 m ) ON and peripheral supply 2 half bridges for 3 A load (R = 300 m ) ON Programmable reset generator for power-on 1 configurable high-side driver for up to 1.5 A and undervoltage (R = 500 m ) or 0.35 A (R = 1600 m) ON ON Configurable window watchdog load LIN 2.2a compliant (SAEJ2602 compatible) 1 configurable high-side driver for 0.8 A transceiver (R = 800 m ) or 0.35 A (R = 1600 m) ON ON Advanced high speed CAN transceiver (ISO load 11898-2:2003 /-5:2007 and SAE J2284 3 configurable high-side drivers for compliant) with local failure and bus failure 0.15 A/0.35 A (R =2 ) ON diagnosis and selective wake-up functionality 1 configurable high-side driver for 0.25 A/0.5 A according to ISO 11898-6:2013 (R = 2 ) to supply EC Glass MOSFET ON Separated (Isolated) fail-safe block with 2 LS 4 configurable high-side drivers for (R = 1 ) to pull down the gates of the ON 0.15 A/0.25 A (R = 5 ) ON external HS MOSFETs Internal 10bit PWM timer for each stand-alone Thermal clusters high-side driver A/D conversion of supply voltages and internal Buffered supply for voltage regulators and 2 temperature sensors high-side drivers (OUT15 & OUT HS / both Embedded and programmable VS duty cycle P-channel) to supply e.g. external contacts adjustment for LED driver outputs Programmable soft-start function to drive loads with higher inrush currents as current limitation Applications value (for OUT1-6, OUT7, OUT8 and OUT HS) with thermal expiration feature Door zone applications. March 2019 DS11546 Rev 5 1/197 This is information on a product in full production. www.st.comL99DZ100G, L99DZ100GP Table 1. Device summary Order codes Package Variant Tray Tape and reel High Speed CAN Transceiver with partial networking LQFP-64 epad L99DZ100GP L99DZ100GPTR (ISO 11898-6:2013) High Speed CAN Transceiver (ISO 11898-2:2003 LQFP-64 epad L99DZ100G L99DZ100GTR and 11898-5:2007) Product label 2/197 DS11546 Rev 5