STPS1L60 Power Schottky rectifier Datasheet - production data Description K A Axial and surface mount power Schottky rectifiers suited to switched mode power supplies and high frequency DC to DC converters. A A Packaged in SMA, STmite flat, DO-41 and K K SOD123Flat, this device is especially intended DO-41 SMA for use in low voltage, high frequency inverters and small battery chargers. A A Table 1: Device summary K K Symbol Value STmite flat SOD123Flat IF(AV) 1 A VRRM 60 V VF(typ.) 0.50 V Features T (max.) 175 C j Negligible switching losses Low forward voltage drop Surface mount miniature packages Avalanche capability specified August 2016 DocID7504 Rev 10 1/15 www.st.com This is information on a product in full production. Characteristics STPS1L60 1 Characteristics Table 2: Absolute ratings (limiting values at 25 C, unless otherwise specified) Symbol Parameter Value Unit VRRM Repetitive peak reverse voltage 60 V SMA/DO-41 10 IF(RMS) Forward rms current A STmite flat 2 SMA T = 155 C L DO-41 TL = 145 C Average forward current I 1 A F(AV) = 0.5, square wave SOD123Flat T = 160 C L STmite flat TC = 160 C SMA DO-41 40 Surge non repetitive STmite flat I t = 10 ms sinusoidal A FSM p forward current SOD123Flat 50 P Repetitive peak avalanche power t = 10 s, T = 125 C 85 W ARM p j Tstg Storage temperature range -65 to +175 C (1) T Operating junction temperature range -40 to +175 C j Notes: (1) (dP /dT ) < (1/R ) condition to avoid thermal runaway for a diode on its own heatsink. tot j th(j-a) Table 3: Thermal parameters Symbol Parameter Max. value Unit SMA 30 Rth(j-l) Junction to lead DO-41/lead length = 10 mm 45 C/W SOD123Flat 20 R Junction to case STmite flat 20 th(j-c) 2/15 DocID7504 Rev 10