STTH15RQ06WY STMicroelectronics

STTH15RQ06-Y Datasheet Automotive turbo 2 ultrafast high voltage rectifier Features K A K K AEC-Q101 qualified High junction temperature capability A A K A NC Ultrafast with soft recovery behavior DPAK NC DPAK HV Low reverse current K Low thermal resistance Reduce switching and conduction losses PPAP capable A K DPAK HV creepage distance (anode to cathode) = 5.38 mm min. (with top A DO-247 coating) K TO-220AC V guaranteed from -40 C to 175 C RRM ECOPACK 2 compliant (DO-247, TO-220AC) Applications Output rectification PFC UPS Air conditioning Charging station Product status link STTH15RQ06-Y Description The STTH15RQ06-Y has been developed to be used in application requiring a high- Product summary voltage secondary rectification for LLC Full Bridge topology. I 15 A F(AV) It is also suited for use in switching power supplies and automotive applications, industrial applications, as rectification, freewheeling and clamping diode. V 600 V RRM V (max.) 1.45 V F t (max.) 25 ns rr T -40 C to 175 C j DS12163 - Rev 2 - November 2018 www.st.com For further information contact your local STMicroelectronics sales office.STTH15RQ06-Y Characteristics 1 Characteristics Table 1. Absolute ratings (limiting values, at 25 C, unless otherwise specified) Symbol Parameter Value Unit V T = -40 C to +175 C Repetitive peak reverse voltage 600 V RRM j I Forward rms current 50 A F(RMS) I Average forward current = 0.5, square wave T = 115 C 15 A F(AV) C I Surge non repetitive forward current t = 10 ms sinusoidal 120 A FSM p T Storage temperature range -65 to +175 C stg T Operating junction temperature range -40 to +175 C j Table 2. Thermal parameters Symbol Parameter Max. value Unit R Junction to case 1.5 C/W th(j-c) Table 3. Static electrical characteristics Symbol Parameter Test conditions Min. Typ. Max. Unit T = 25 C - 20 j (1) V = V I Reverse leakage current A R R RRM T = 150 C - 40 400 j T = 25 C - 2.45 j I = 7.5 A F T = 150 C - 1.15 1.45 j (2) V Forward voltage drop V F T = 25 C - 2.95 j I = 15 A F T = 150 C - 1.45 1.85 j 1. Pulse test: t = 5 ms, < 2% p 2. Pulse test: t = 380 s, < 2% p To evaluate the conduction losses, use the following equation: 2 P = 1.05 x I + 0.053 x I F(AV) F (RMS) Table 4. Dynamic electrical characteristics Symbol Parameter Test conditions Min. Typ. Max. Unit I = 0.5 A, I = 1 A, I = 0.25 A - 25 F R rr t T = 25 C Reverse recovery time ns rr j I = 1 A, V = 30 V, dl /dt = -50 A/s - 35 50 F R F I Reverse recovery current - 6 8 A RM Q Reverse recovery charge T = 125 C I = 15 A, V = 400 V, dl /dt = -200 A/s - 250 nC RR j F R F t Reverse recovery time - 70 ns rr For more information, please refer to the following application notes related to the power losses: DS12163 - Rev 2 page 2/17