STUSB4500 Datasheet Standalone USB PD sink controller with short-to-VBUS protections Features Auto-run Type-C and USB PD sink controller Dead battery mode support Up to 3 sink PDO configurable profiles (up to 20 V 5 A) Dual high power charging path support Integrated V switch gate drivers (PMOS) BUS Integrated V voltage monitoring BUS Internal and/or external V discharge paths BUS Short-to-VBUS protections on CC pins (22 V) High voltage capability on V pins (28 V) BUS Dual power supply (V and/or V ): SYS DD V = 3.0 V 5.5 V SYS V = 4.1 V 22 V DD Debug accessory mode support Temperature range: -40 C up to 105 C ESD: 3 kV HBM - 1.5 kV CDM Certified: USB Type-C rev 1.2 USB PD rev 2.0 (TID 1000133) Interoperable with USB PD rev 3.0 Product status link STUSB4500 Applications Device summary STUSB4500QTR Printers, camcorders, cameras Order code STUSB4500BJR IoT, drones, accessories and battery powered devices Standalone USB PD LED lighting and industrial Description sink controller (auto-run Toys, gaming, POS, scanner mode) Healthcare and handheld devices QFN-24 EP (4x4) Any Type-C sink device up to 100 W (20 V 5 A) Package WLCSP-25 (2.6x2.6x0.5) Description Marking 4500 The STUSB4500 is a USB power delivery controller that addresses sink up to 100 W (20 V 5 A). It implements a proprietary algorithm to allow the negotiation of a power delivery contract with a source without MCU support (auto-run mode). PDO profiles are configured in an integrated non-volatile memory. The device supports dead battery mode and is suited for sink devices powered from dead battery state and requiring high power charging profile to be fully operational. Thanks to its 20 V technology, it implements high voltage features to protect the CC pins against short-circuits to V up to 22 V and to support high voltage on the BUS V pins directly connected to the V power path up to 28 V. BUS BUS DS12499 - Rev 7 - June 2021 www.st.com For further information contact your local STMicroelectronics sales office.STUSB4500 Functional description 1 Functional description The STUSB4500 is a USB Type-C and power delivery controller IC for sink applications. It is able to negotiate a power delivery contract with a source without MCU support (auto-run mode). It relies on proprietary algorithms and configurable PDO (power data objects) thanks to an integrated non-volatile memory. It supports dead battery mode to allow a system to be powered from an external source directly. Combined with its capability to negotiate directly a power contract, the STUSB4500 is the ideal controller device for autonomous systems requiring high power charging profile to be fully operational. The STUSB4500 major role is to: 1. Detect the connection between two USB Type-C ports (attach detection) 2. Establish a valid source-to-sink connection 3. Determine the attached device mode: source or debug accessory 4. Resolve cable orientation and twist connections to establish USB data routing (MUX control) 5. Negotiate a USB power delivery (PD) contract with a PD capable source device 6. Configure the incoming V power path and the charging paths accordingly BUS 7. Monitor the V power path and manage the V voltage transitions BUS BUS 8. Handle the high voltage protections The STUSB4500 also provides: Dead battery mode PDO (power data object) customization through NVM Internal and/or external V discharge paths BUS Dual high power charging path support Debug accessory mode detection Customization of the device configuration through NVM to support specific applications 1.1 Block overview Figure 1. Functional block diagram VSYS Internal VBUS VS DISCH VBUS status voltage VDD supply monitoring RESET POR VBUS EN SNK A B SIDE CC1DB DISCH CC CC1 Port C line CC2 controller access ADDR 1..0 CC2DB SCL IC Port status slave SDA ALERT ATTACH POWER OK2 Control Device POWER OK3 Policy Protocol Physical Policy GPIO Engine Layer Layer Manager GND DS12499 - Rev 7 page 2/43