Product Fact Sheet Industrial 2.5 SATA SSD X-600 Series SATA Gen3 - 6.0 Gbit/s, SLC Commercial and Industrial Temperature Grade Date: March 31, 2020 Revision: 1.02 Product Fact Sheet X-600 Series Product Summary Capacities: 8 GBytes, 16 GBytes, 32 GBytes, 64 GBytes, 128 GBytes, 256 GBytes Form Factor: 2.5 SATA Solid State Drive (70 mm x 100 mm x 7 mm) Compliance: SATA Gen3 - 6 Gbit/s (Gen2 - 3 Gbit/s and Gen1 - 1.5 Gbit/s backward compatible) Command Sets: Supports ATA/ATAPI-8 and ACS-2 Performance: o Read Performance: Sequential Read up to 520 MBytes/s, Random Read 4K up to 79,000 IOPS o Write Performance: Sequential Write up to 425 MBytes/s, Random Write 4K up to 76,000 IOPS 1 Operating Temperature Range : o Commercial: 0 C to 70 C o Industrial: -40 C to 85 C Storage Temperature Range: -40 C to 85 C Operating Voltage: 5 V 10% (3.3 V available upon request) Power (Max): Read (Active): 2.45 W Write (Active): 3.8 W Idle: 550 mW Slumber: 75 mW Data Retention: 10 Years Life Begin / 1 Year Life End 2 Endurance in TeraBytes Written (TBW) Max Capacity : Client 16,965 Embedded 5,495 Enterprise 2,460 Shock/Vibration: 1,500 g / 50 g High-Performance 32-Bit Processor with Integrated, Parallel Flash Interface Engines: o Single-Level Cell (SLC) NAND Flash o Hardware BCH Code ECC (up to 66 bit correction per 1 KByte page) Mean Time Between Failure (MTBF): > 2,000,000 hours 16 Data Reliability: < 1 non-recoverable error per 10 bits read Product Features Dynamic and Static Wear Leveling Subpage Mode Flash Translation Layer (FTL) Active and Passive Data Care Management Lifetime Enhancements o Dynamic Bad Block Remapping o Write Amplification Reduction On-Board Power Fail Protection AHCI, TRIM, and NCQ Support ATA Security Feature Set Support DEVSLP Compatible In-Field Firmware Update Enterprise-Grade Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.) 30 inch Gold-Plated Connector (IPC-6012B Class 2 Compliant) AES256 Encryption (on request) Swissbit Life Time Monitoring (SBLTM) Tool and SDK for SBLTM (on request) Why Swissbit Swissbit is focused on the design, development, manufacture, and support of leading edge memory and storage solutions for the worldwide OEM/ODM marketplace. As a global supplier, Swissbit recognizes and addressees the higher level of application requirements of todays industrial, Netcom, and automotive customers by providing best-in-class products and services, with uncompromised attention to driving overall value and quality. 1 Adequate airflow is required to ensure the temperature, as reported in the S.M.A.R.T. data, does not exceed 115C (industrial temperature drive) and 100C (commercial temperature drive) respectively. 2 According to JEDEC (JESD47I), the time to write the full TBW is a minimum of 18 months. Higher average daily data volume reduces the specified TBW. The values listed are estimates and are subject to change without notice. Swissbit AG Revision: 1.02 Industriestrasse 4 Doc-2791 CH-9552 Bronschhofen www.swissbit.com File: X-600 fact sheet Rev102 Switzerland industrial swissbit.com Page 2 of 2