FQA Series Specifications Model FQA Input/Output Input Voltage Range Vdc -40 to +40 Input Current (max) A 20 DC Resistance (typical) mW Positive Leg: 7.5, Negative Leg: 5 Power Loss W 5 20 A Differential Mode Attenuation at 300 kHz dB 50 (50 W source & load impedance) Common Mode Attenuation at 30 MHz dB 50 (50 W source & load impedance) Qualification Methods - Consistent with MIL-STD-883F and MIL-STD-202G Radiated Emmisions RE101 Navy Radiated Emmisions RE102 10kHz to 18GHz Fixed Wing internal, >25m Nose to Tail Compliance Matrix Conducted Emissions CE101 Surface ships and submarines (Tested with FQX-HQA-EVK-D0 evaluation Conducted Emissions CE102 Basic Curve board: FQA filter + 2X HQA DC-DC Conducted Susceptibility CS101 Curve 2, Imax=10A Converter, 200W resistive load) Conducted Susceptibility CS114 Curve 5 Conducted Susceptibility CS115 Basic Test Signal Conducted Susceptibility CS116 10kHz to 100MHz Safety Agency Certifications - IEC/UL/CSA/EN62368-1, 60950-1, CE Mark Environmental Operating Baseplate Temperature C Standard screening (-S): -40 to 115 Enhanced screening (-M): -55 to 115 Storage Temperature C -65 to 125 Operating Humidity (non condensing) %RH MIL-STD-883 Method 1004.7 Cooling - Conduction, convection or forced air Withstand Voltage (1 minute) Vdc 2250 (Terminals to Case) Vibration - MIL-STD-202G, Method 201A, Unpowered, sweep 1: 5 to 50 Hz at 05.g, sweep 2: 50 to 500 Hz at 1.5g, three axis Shock - MIL-STD-202G, Method 213B, Table 213-1, Test Condition I, Unpowered, 50G half sine 6ms, three axis Other Weight (Typ) g 100 Size (LxWxH) mm Flanged version (-007-x): 60.6 x 55.9 x 12.7, Non-flanged version (-N07-x): 60.6 x 39.5 x 12.7 Size (LxWxH) Inches Flanged version (-007-x): 2.39 x 2.20 x 0.50, Non-flanged version (-N07-x): 2.39 x 1.56 x 0.50 MTBF - Telcordia SR-332 Hrs 15 M 50 C ambient full load Warranty yrs 3 Notes See website for detailed specifications 1. See thermal performance section 2 FQA Series