Application Specification
EurocardConnectorsTypesB,C,M,Q,
R,andEnhancedTypeC
114--9014
(Board-to-BoardApplication)
18 JUN 12 Rev K
All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and
NOTE
inches]. Unless otherwise specified, dimensions have a tolerance of +0.13 [+.005] and angles have a tolerance of +2_.
Figures and illustrations are for identification only and are not drawn to scale.
i
1. INTRODUCTION
This specification covers requirements for the printed circuit (pc) board--to--board application of Eurocard
Connectors Types B, C, M, Q, R, and Enhanced Type C. These two--piece, 2.54 mm [.100 in.] row--to--row and
in--row centerline contact connectors are designed to mate with all DIN 41612 and IEC 603--2 connectors of
similar type and contact arrangement. The two-- and three--row connectors are available in 32, 64, and 96
positions, as well as half sizes and expanded sizes as mating pin and receptacle connectors.
The housings are available pre--loaded with ACTION PIN* thin stock and square stock contacts (0.64 mm
[.025 in.]), solder tines and wrap--type contacts in various lengths. Type M housings have contact cavities at
each end that will accept solder cup, coaxial crimp--type, and solder type contacts. Multiple pin heights for
connectors with make first, break last (MFBL) contacts and selective contact loading are available.
When corresponding with TE Connectivity Personnel, use the terminology provided in this specification to
facilitate your inquiries for information. Basic terms and features of these components are provided in Figure 1.
Row A
Polarizing
Row B
Bar
Row C
Housing
Mounting
TypeC
Ear
Receptacle
Socket
Connector
Contacts
ACTION PIN
Thin Stock Contact
Ribbing
Standoff
TypeRReceptacle
Connector
Pin
Hood
Polarizing
Indent
Pin
Contact
Boardlock
Solder Tine
ACTION PIN 0.64 mm
Wrap--Type
[.025 in.] Square Stock
Contact
Contact
TypeCPinConnector
TypeRPinConnector
Figure 1 (contd)
E2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company TOOLING ASSISTANCE CENTER 1--800--722--1111 This controlled document is subject to change.
1 of 18
All Rights Reserved PRODUCT INFORMATION 1--800--522--6752 For latest revision and Regional Customer Service,
TE logo is a trademark. visit our website at www.te.com
LOCB
*Trademark. Other product names, logos, or company names might be trademarks of their respective owners.114-9014
PC Board Mount
Power Contact
ACTION PIN
Thin Stock Contact
Solder Tine
Solder Cup
Solder Cup
Power Contact
Coaxial Cable
Coaxial Cable
Power Contact
In--Line Contact
In--Line Contact
Coaxial Solder Right--Angle
PC Board Mount
Right--Angle PC Board
Tine Contact Cable Contact
Coaxial Contact
Mount Power Contact
TypeMReceptacleConnector TypeMPinConnector
Figure 1 (end)
2. REFERENCEMATERIAL
2.1. RevisionSummary
The following revision summary of changes and additions have been made to this specification for this revision.
S Updated document to corporate requirements
S Corrected dimension line in Figure 10
2.2. CustomerAssistance
Product Base Part Number 535032 and Product Code 5607 are representative of Eurocard Connectors. Use of
these numbers will identify the product line and expedite your inquiries through a service network established
to help you obtain product and tooling information. Such information can be obtained through a local TE
Representative or, after purchase, by calling the Tooling Assistance Center number at the bottom of page 1.
2.3. Drawings
Customer Drawings for product part numbers are available from the service network. The information
contained in Customer Drawings takes priority if there is a conflict with this specification or with any other
technical documentation supplied by TE.
2.4. Specifications
Product Specification 108--26003 provides information for ACTION PIN contacts. Product Specification
108--5299 contains information for ACTION PIN contacts and solder type contacts for Type Q connectors.
2 of 18 Rev K