Catalog: 1654001
Corcom Product Guide Issue Date: 06.2011
Multipurpose Power Line RFI Filter for Emission Control
V and W Series
UL Recognized
CSA Certied
VV1 / VW1
VDE ApprovedE
VV6 / VW6
Both the V and W series are effective to control
Specications
2
emissions in equipment using SCR and T L circuits
Maximum leakage current each Line to Ground:
for compliance with FCC Part 15, Subpart J and
@ 120 VAC 60 Hz: .5 mA
EN55022, Level A, down to 150kHz
@250 VAC 50 Hz: .82 mA
Hipot rating (one minute):
Line to Ground: 2250 VDC
V Series
Line to Line: 1450 VDC
Offers an N = 3 (T) Line to Ground impedance to
Rated Voltage (max): 250 VAC
common mode and an N = 5 Dbl. Pi) impedance
for Line to Line differential mode interference
Operating Frequency: 50/60 Hz
Designed for susceptibility use when equipment
Rated Current: 3 to 20A*
impedance at RF frequencies is low
Operating Ambient Temperature Range
(at rated current I ): -10C to +40C
W Series r
In an ambient temperature (T ) higher than +40C
a
Offers an N = 4 (Dbl. L) Line to Ground
the maximum operating current (I ) is calculated as
o
impedance for common mode and an N=5 (Dbl.
follows: I = I (85-Ta)/45
o r
Pi) impedance for Line to Line differential mode
interference
Electrical Schematics
Designed for use when equipment impedance at
V Series
RF frequencies is high
LINE LOAD
Two stage construction provides excellent
suppression at high frequencies
Ordering Information
20 V V 6
W Series (3, 6 & 10A)
LINE LOAD
Input / Output Style
1 .250 [6.3] spade terminals
6 Threaded bolt
7 IEC inlet* (line side)
.250 [6.3] spade terminals W Series (20A)
(load side) LINE LOAD
V or W Series
Leakage current designation
V Standard
Current Rating
B20VW7, 20A model tested by Underwriters Laboratories
3, 6, 10 or 20A
to US and Canadian requirements and is
VDE approved at 16A, 250VAC
*IEC 60320-1 C20 inlet mates with C19 connector
86
Dimensions are in inches and millimeters unless otherwise specied. Values in italics For email, phone or live chat, please go to
te.com/help
are metric equivalents. Dimensions are shown for reference purposes only.
corcom.com
Specications subject to change.RFI Power Line Filters
Catalog: 1654001
Corcom Product Guide Issue Date: 06.2011
Multipurpose Power Line RFI Filter for Emission Control (continued)
Case Styles (continued)
V and W Series
VW7
Threaded inserts
Available Part Numbers
3VV1 3VW1
2.25
6VV1 3VW1
B
57.15
10VV1 10VW1
20VV1 20VW1 1
20VV6 20VW6 .047 .010
1.19 .25
20VW7*
5.33 .025
135.38 .635
A C
Case Styles
V1 / W1 (3, 6 & 10A)
Recommended Panel Cutout
B
.157
Dia. 2.30
3.98
58.42
D
E 1.22 1.60
C
L
30.99 40.46
C
A
.75
19.05
.219 Mounting Plane
R
5.56
2.12
53.85
V1 / W1 (20A)
Case Dimensions
A B CD E
Part No.
E D B
3VV1, 3VW1
6VV1, 6VW1
2.00
50.8
10VV1, 10VW1
A
C
20VV1, 20VW1
V6 / W6
20VV6, 20VW6
20VW7
E
D B
2.00
50.8
A C
*20VW7, 20A model tested by Underwriters Laboratories
to US and Canadian requirements and is
VDE approved at 16A, 250VAC
87
Dimensions are in inches and millimeters unless otherwise specied. Values in italics For email, phone or live chat, please go to
te.com/help
are metric equivalents. Dimensions are shown for reference purposes only.
corcom.com
Specications subject to change.