B-051-02-01 TE Connectivity

SPECIFICATION CONTROL DRAWING Product Revision Product Dimensions Cable Dimensions Product Name L A B D E J max min min max min min B-051-00-01 B 27.0 19.0 17.0 17.0 10.0 27.0 (1.065) (0.750) (0.670) (0.670) (0.395) (1.065) B-051-01-01 D 27.5 25.0 23.0 23.0 12.7 27.5 (1.085) (0.985) (0.905) (0.905) (0.500) (1.085) B-051-02-01 D 33.2 34.0 33.0 33.0 19.1 33.2 (1.310) (1.340) (1.300) (1.300) (0.750) (1.310) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent clear, radiation cross-linked modified polyolefin. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Cd18 per ANSI-J-STD-006. FLUX: TYPE ROM1 per ANSI-J-STD-004. APPLICATION 1. These controlled soldering devices are designed to terminate the braid of a braided connector backshell to the braid of a tin plated or bare copper shield on a cable having an insulation rated for at least +85C. 2. Temperature range: -55C to +125C. For application tooling, consult your local Raychem technical service. For best results, prepare the cable as shown: * A trademark of Raychem Corporation. TITLE: Raychem Corporation THERMOFIT Raychem 300 Constitution Drive SOLDERSLEEVE* DEVICES, SHIELD DEVICES Menlo Park, CA 94025 TERMINATION-LOW TEMPERATURE USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. DOCUMENT NO. B-051-0X-01 INCHES DIMENSIONS ARE BETWEEN BRACKETS. TOLERANCES: ANGLES: N/A Raychem reserves the right to amend this DCR NUMBER: REPLACES: 0.00 N/A drawing at any time. Users should evaluate D980628 B0510101 0.0 N/A ROUGHNESS IN the suitability of the product for their 0 N/A MICRON application. DRAWN BY: DATE: PROD. REV. DOC ISSUE: SCALE: SIZE: SHEET: M. FORONDA 06/15/98 SEE TABLE 2 None A 1 of 1 If this document is printed it becomes uncontrolled. Check for the latest revision.