TeraRanger Multiflex is the modular solution for short range (<2m) distance sensing applications. Connect up to eight plug and play sensors on one flexible bus to create custom configurations and to place sensors where needed. An array of calibrated distances in millimetres is streamed from the Multiflex Hub. Its the ideal and higher performance alternative to ultrasound for shorter-range distance sensing, delivered as a convenient and easy to use kit. A user manual is available on the TeraRanger website, and a ROS (Robot Operating System) node will help you get up and running quickly. TeraRanger Multiflex comes in 2 versions: Multiflex Multiflex PCB Technical Specifications: Multiflex Multiflex PCB Principle: Infrared laser Time-of-Flight (ToF) Range: Up to 1.10m Up to 2.00m Up to 50Hz* Up to 30Hz* Update rate: Range resolution: 1mm 1mm Accuracy: 6cm 3cm Field of view: Approx. 20 Supply voltage: 5V DC Supply current: 50mA (typical conditions with 8 sensors connected) USB 2.0 Micro-B Interfaces: UART, +3.3V level, 115200 baud I2C, +3.3V level, 400kHz 7 pin DF13 Connectors: Micro USB (50cm cable provided) Weight: Each sensor unit: Approx. 2g, Multiflex Hub: 5 g, Total kit: Approx. 20g Sensors and Hub protection Yes No covers: Eye safety: Class 1 laser device compliant with standard IEC 60825-1:2014-3rd ed. Notes: *Output from the Hub with a single sensor connected. When more sensors are connected, divide this number by the total number of sensors. All tests conducted against a white diffuse reflector at nominal voltage (5V) and typical temperature (23 degrees C) with the complete Field of View covered. In the box: Multiflex Multiflex PCB 8 sensors with covers 8 sensors without covers Multiflex Hub and case Multiflex Hub 8 Flat Flex cables (10cm) 8 Flat Flex cables (10cm) Micro USB cable (50cm) Micro USB cable (50cm) The TeraRanger Multiflex can be purchased via our online store at: