TLP2160(TP,F) Toshiba

TLP2160 Photocouplers Infrared LED & Photo IC TLP2160TLP2160TLP2160TLP2160 1. 1. ApplicationsApplications 1. 1. ApplicationsApplications Factory Networking High-Speed Digital Interfacing for Instrumentation and Control Devices Plasma Display Panels (PDPs) 2. 2. 2. 2. GeneralGeneralGeneralGeneral The Toshiba TLP2160 consists of a high-output infrared LED coupled with a high-speed photo IC chip. TLP2160 guarantees operation at up to 125 and on supplies from 2.7 V to 5.5 V. It is offered in the SO8 package. It has a totem-pole output that can both sink and source current. With two LED-photoreceptor pairs, the TLP2160 helps save board space. An internal noise shield provides a guaranteed common-mode transient immunity of 20 kV/ s. 3. 3. FeaturesFeatures 3. 3. FeaturesFeatures (1) Inverter logic type (totem pole output) (2) Package: SO8 (3) Operating temperature range: -40 to 125 (4) Supply voltage: 2.7 to 5.5 V (5) Data transfer rate: 20 MBd (typ.) (NRZ) (6) Threshold input current: 3.5 mA (max) (7) Supply current: 5 mA (max) (8) Common-mode transient immunity: 20 kV/s (min) (9) Isolation voltage: 2500 Vrms (min) (10) Safety standards UL-recognized: UL 1577, File No.E67349 cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349 (Note 1) VDE-approved: EN 60747-5-5 (Note 1)(Note 1)(Note 1) Option (V4) Note 1: When a VDE approved type is needed, please designate the Option (V4)Option (V4)Option (V4). 4. 4. 4. 4. Packaging and Pin AssignmentPackaging and Pin AssignmentPackaging and Pin AssignmentPackaging and Pin Assignment 1: Anode1 2: Cathode1 3: Cathode2 4: Anode2 5: GND 6: V (Output2) O2 7: V (Output1) O1 8: V CC 11-5K1S Start of commercial production 2011-03 2016-2019 2019-11-21 1 Toshiba Electronic Devices & Storage Corporation Rev.4.0TLP2160 5. 5. 5. 5. Internal Circuit (Note)Internal Circuit (Note)Internal Circuit (Note)Internal Circuit (Note) Note: A 0.1-F bypass capacitor must be connected between pin 8 and pin 5. 6. 6. 6. 6. Principle of OperationPrinciple of OperationPrinciple of OperationPrinciple of Operation 6.1. 6.1. Truth TableTruth Table 6.1. 6.1. Truth TableTruth Table Input LED1(2) M1(3) M2(4) Output1(2) H ON OFF ON L L OFF ON OFF H 6.2. 6.2. 6.2. 6.2. Mechanical ParametersMechanical ParametersMechanical ParametersMechanical Parameters Characteristics Min Unit Creepage distances 4.2 mm Clearance distances 4.2 Internal isolation thickness 2016-2019 2019-11-21 2 Toshiba Electronic Devices & Storage Corporation Rev.4.0