TLP2704(E Toshiba

TLP2704 Photocouplers Infrared LED & Photo IC TLP2704TLP2704TLP2704TLP2704 1. 1. ApplicationsApplications 1. 1. ApplicationsApplications Intelligent Power Module Signal Isolation Factory Automation (FA) Industrial Inverters 2. 2. 2. 2. GeneralGeneralGeneralGeneral The TLP2704 consists of an infrared LED optically coupled with an integrated high-gain, high-speed photodetector and is housed in the SO6L package. It supports operating temperatures of up to 125 . The SO6L package meets the reinforced insulation class requirements of international safety standards. The photodetector has an internal Faraday shield that provides a guaranteed common-mode transient immunity of 20 kV/s. The TLP2704 guarantees minimum and maximum of propagation delay time, pulse width distortion. Therefore it is suitable for isolation interface between IPM and control IC circuits in motor control application. 3. 3. FeaturesFeatures 3. 3. FeaturesFeatures (1) Inverter logic type (open collector output) (2) Package: SO6L (3) Operating temperature: -40 to 125 (4) Supply voltage: -0.5 to 30 V (5) Threshold input current: 5.0 mA (max) (6) Supply current: 1.3 mA (max) (7) Propagation delay time: t = 400 ns (max), t = 550 ns (max) pHL pLH (8) Pulse width distortion: 400 ns (max) (9) Common-mode transient immunity: 20 kV/s (min) (10) Isolation voltage: 5000 Vrms (min) (11) Safety standards UL-recognized: UL 1577, File No.E67349 cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349 (Note 1) VDE-approved: EN 60747-5-5, EN 62368-1 (Note 1)(Note 1)(Note 1) CQC-approved: GB4943.1, GB8898 Japan and Thailand Factory Option (D4) Note 1: When a VDE approved type is needed, please designate the Option (D4)Option (D4)Option (D4). Start of commercial production 2015-03 2016-2019 2019-11-29 1 Toshiba Electronic Devices & Storage Corporation Rev.9.0TLP2704 4. 4. 4. 4. Packaging (Note)Packaging (Note)Packaging (Note)Packaging (Note) TLP2704 TLP2704(LF4) 11-4N1A 11-4N101A Note: Lead-formed product: (LF4) 5. Pin Assignment 5. 5. 5. Pin AssignmentPin AssignmentPin Assignment 1: Anode 2: N.C. 3: Cathode 4: GND 5: V (Output) O 6: V CC 6. 6. Internal Circuit (Note)Internal Circuit (Note) 6. 6. Internal Circuit (Note)Internal Circuit (Note) Note: A 0.1-F bypass capacitor must be connected between pin 6 and pin 4. 2016-2019 2019-11-29 2 Toshiba Electronic Devices & Storage Corporation Rev.9.0