TLP290
TOSHIBA Photocoupler GaAs Ired & Photo-Transistor
TLP290
Programmable Controllers
Unit: mm
AC/DC-Input Module
Hybrid ICs
TLP290 consist of photo transistor, optically coupled to two gallium arsenide
infrared emitting diodes connected inverse parallel, and can operate directly
by AC input current
Since TLP290 is guaranteed wide operating temperature (Ta=-55 to 110 C)
and high isolation voltage (3750Vrms), its suitable for high-density surface
mounting applications such as programmable controllers and hybrid ICs.
Collector-Emitter voltage : 80 V (min)
Current transfer ratio : 50% (min)
Rank GB : 100% (min)
Isolation voltage : 3750 Vrms (min)
TOSHIBA 11-3C1
Guaranteed performance over -55 to 110 C
Weight: 0.05 g (typ.)
UL recognized : UL1577, File No. E67349
cUL approved : CSA Component Acceptance Service No.5A,
Pin Configuration
File No. 67349
TLP290
SEMKO approved : EN 60065: 2002, Approved no. 1200315
1 4
EN 60950-1: 2001, EN 60335-1: 2002,
Approved no. 1200315
2 3
BSI approved : BS EN 60065: 2002, Approved no. 9036
: BS EN 60950-1: 2006, Approved no. 9037
1: Anode
Option (V4)
Cathode
VDE approved: EN 60747-5-5 Certificate, No. 40009347
2: Cathode
Maximum operating insulation voltage: 707 Vpk
Anode
Highest permissible over-voltage: 6000 Vpk
3: Emitter
(Note) When an EN 60747-5-5 approved type is needed,
4: Collector
please designate the Option(V4)
Construction Mechanical Rating
Creepage distance : 5.0 mm (min)
Clearance : 5.0 mm (min)
Insulation thickness : 0.4 mm (min)
Start of commercial production
2012/02
1 2014-09-08 TLP290
Current Transfer Ratio (Unless otherwise specified, Ta = 25C)
Current Transfer Ration (%)
(I / I )
C F
Classification
TYPE Marking of Classification
(Note1) I = 5 mA, V = 5 V, Ta = 25C
F CE
Min Max
Blank 50 400
Blank, YE, GR, B, GB
Rank Y 50 150 YE
TLP290 Rank GR 100 300 GR
Rank BLL 200 400 B
Rank GB 100 400 GB
Note1: Specify both the part number and a rank in this format when ordering
(e.g.) rank GB: TLP290(GB,E
Note: For safety standard certification, however, specify the part number alone.
(e.g.) TLP290(GB,E: TLP290
Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta = 25C)
Note Rating
Characteristic Symbol Unit
R.M.S. forward current I 50 mA
F(RMS)
Input forward current derating (Ta 90C) I /Ta -1.5 mA /C
F
Input forward current (pulsed) I (Note 2) 1 A
FP
Input power dissipation P 100 mW
D
Input power dissipation derating (Ta 90C) P / Ta -3.0 mW/C
D
Junction temperature T 125 C
j
Collector-emitter voltage V 80 V
CEO
Emitter-collector voltage V 7 V
ECO
Collector current I 50 mA
C
Collector power dissipation P 150 mW
C
Collector power dissipation derating (Ta 25C) P /Ta -1.5 mW /C
C
Junction temperature T 125 C
j
Operating temperature range T -55 to 110 C
opr
Storage temperature range T -55 to 125 C
stg
Lead soldering temperature T 260 (10s) C
sol
Total package power dissipation P 200 mW
T
Total package power dissipation derating (Ta 25C) P /Ta -2.0 mW /C
T
Isolation voltage BV (Note3) 3750 Vrms
S
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if
the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note2: Pulse width 100s, frequency 100Hz
Note3: AC, 1minute, R.H. 60%, Device considered a two terminal device: LED side pins shorted together and
detector side pins shorted together.
2 2014-09-08
Detector LED