TLP3021(S),TLP3022(S),TLP3023(S) TOSHIBA PHOTOCOUPLER GaAs IRED & PHOTO-TRIAC TLP3021(S),TLP3022(S),TLP3023(S) Unit: mm OFFICE MACHINE HOUSEHOLD USE EQUIPMENT TRIAC DRIVER SOLID STATE RELAY The TOSHIBA TLP3021 (S), TLP3022 (S) and TLP3023 (S) consist of photo-triac optically coupled to a gallium arsenide infrared emitting diode in a six lead plastic DIP. z Peak Off-State Voltage : 400 V (min) z Trigger LED Current : 15 mA (max) (TLP3021(S)) 10 mA (max) (TLP3022(S)) 5 mA (max) (TLP3023(S)) z On-State Current : 100 mA (max) z Isolation Voltage : 5000Vrms(Min) JEDEC z UL Recognized : UL1577,File No.E67349 JEITA z SEMKO Approved : SS EN60065 TOSHIBA 11-7A9 SS EN60950, File No.9841105 Weight: 0.39g (typ.) z BSI Approved : BS EN60065, File No.8385 BS EN60950, File No.8386 z Option (D4) type VDE approved: DIN EN60747-5-2 Pin Configuration (top view) Approved No. 40009302 Maximum operating insulation voltage: 890VPK 1 6 Highest permissible over voltage: 8000VPK 2 (Note):When a EN60747-5-2 approved type is needed, please designate theOption (D4 4 3 1: Anode z Construction Mechanical Rating 2: Csthode 7.62 mm pich 10.16 mm pich 3: N.C. Standard Type TLPxxxxF Type 4:Terminal 1 Creepage Distance 7.0 mm (Min) 8.0 mm (Min) 6:Terminal 2 Clearance 7.0 mm (Min) 8.0 mm (Min) Insulation Thickness 0.5 mm (Min) 0.5 mm (Min) 1 2010-10-01 TLP3021(S),TLP3022(S),TLP3023(S) Absolute Maximum Ratings (Ta=25C) CHARACTERISTIC SYMBOLRATING UNIT Forward Current I 50 mA F Forward Current Derating (Ta 53C) I /C 0.7 mA /C F Peak Forward Current (100 s pulse, 100pps) I 1 A FP Power Dissipation P 100 mW D Power Dissipation Derating (Ta 25C) P /C -1.0 mW/C D Reverse Voltage V 5 V R Junction Temperature Tj 125 C Off-State Output Terminal Voltage V 400 V DRM Ta=25C 100 On-State RMS Current I mA T(RMS) Ta=70C 50 On-State Current Derating (Ta 25C) I/C -1.1 mA /C T Peak On-State Current (100s pulse, 120pps) I 2 A TP Peak Nonrepetitive Surge Current (Pw=10ms) I 1.2 A TSM mW Power Dissipation P 300 D Power Dissipation Derating (Ta 25C) P /C -4.0 mW/C D Junction Temperature T 115 C j Storage Temperature Range T 55 to 150 C stg Operating Temperature Range T 40 to 100 C opr Lead Soldering Temperature (10s) T 260 C sol Total Package Power Dissipation P 330 mW T mW /C Total Package Power Dissipation Derating (Ta 25C) P/C -4.4 T Isolation Voltage (AC,1min. , R.H. 60%) (Note 2) BV 5000 Vrms S Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). (Note 2) Device considered a two terminal device :Pins1,2 and 3 shorted together and pin4 and pin6 shorted together. Recommended Operating Conditions CHARACTERISTIC SYMBOL MIN.TYP.MAX.UNIT Supply Voltage V 120 V ac AC * Forward Current I 15 20 25 mA F Peak On-State Current I 1 A TP Operating Temperature T 25 85 C opr Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. *In The case of TLP3022 2 2010-10-01 DETECTOR LED