TLP560G TOSHIBA Photocoupler GaAs Ired & Photo-Triac TLP560G Triac Driver Unit: mm Programmable Controllers AC-Output Module Solid State Relay The TOSHIBA TLP560G consists of a photo-triac optically coupled to a gallium arsenide infrared emitting diode in a six lead plastic DIP package. Peak off-state voltage: 400 V (min) On-state current: 100 mA (max) Isolation voltage: 2500 Vrms (min) UL recognized: UL1577 File No. E67349 cUL approved : CSA Component Acceptance Service No. 5A, File No.E67349 Option (D4) VDE approved : DIN EN60747-5-5 (Note1) Note 1: When a EN60747-5-5 approved type is needed, please designate Option(D4) TOSHIBA 11-7A9 Weight: 0.39g (typ.) Trigger LED Current (mA) Classification Marking of V = 3V, Ta = 25C T (Note 2) Classification Min Max (IFT5) 5 T5 (IFT7) 7 T5, T7 Standard 10 T5, T7, blank Pin Configuration (top view) Note 2: Ex. (IFT5) TLP560G(IFT5) Note: Application type name for certification test, please use standard product type name, i.e. 6 1 TLP560G(IFT5): TLP560G Note: According to VDE0110, table 4. 2 3 4 1 : Anode 2 : Cathode 3 : N.C. 4 : Triac Terminal 6 : Triac Terminal Start of commercial production 1982-12 1 2017-07-10 TLP560G Absolute Maximum Ratings (Ta = 25C) Characteristic Symbol Rating Unit Forward current I 50 mA F Forward current derating (Ta 53C) I / C -0.7 mA / C F Peak forward current (100s pulse, 100pps) I 1 A FP Reverse voltage V 5 V R P 100 mW Diode power dissipation D P /C -1.4 mW/C Diode power dissipation derating (Ta 53C) D Junction temperature T 125 C j Offstate output terminal voltage V 400 V DRM Ta = 25C 100 On-state RMS current I mA T(RMS) Ta = 70C 50 On-state current derating (Ta 25C) I / C -1.1 mA / C T Peak onstate current (100s pulse, 120pps) I 2 A TP Peak nonrepetitive surge current I 1.2 A TSM (Pw = 10ms) Output power dissipation PO 300 mW Output power dissipation derating (Ta 25C) P / C -3.0 mW / C O Junction temperature T 115 C j Storage temperature range T -55 to 125 C stg Operating temperature range Topr -40 to 100 C Lead soldering temperature (10s) T 260 C sol Isolation voltage (AC, 60 s, R.H. 60%) BV 2500 V S rms Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Recommended Operating Conditions Characteristic Symbol Min Typ. Max Unit Supply voltage V 120 V AC ac Forward current I 15 20 25 mA F Peak onstate current I 1 A TP Operating temperature T -25 85 C opr Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2 2017-07-10 Detector LED