TLP597G(F) Toshiba

TLP597G TOSHIBA Photocoupler Photo Relay TLP597G Cordless Telephone PBX Unit: mm Modem The TOSHIBA TLP597G consists of an infrared emitting diode optically coupled to a photo-MOSFET in a six lead plastic DIP package (DIP6). The TLP597G is a bi-directional switch which can replace mechanical relay in many applications. Peak off-state voltage: 350 V (min) Trigger LED current: 3 mA (max) On-state current: 120 mA (max) (A connection) On-state resistance: 35 (max) (A connection) Isolation voltage: 2500 Vrms (min) UL-recognized: UL 1577, File No.E67349 VDE-approved: EN 60747-5-5 (Note 1) Note 1: When a VDE approved type is needed, TOSHIBA 11-7A8S please designate the Option(D4). Weight: 0.4 g (typ.) Pin Configuration (top view) 1 6 1 : Anode 2 : Cathode 3 : NCN.C. 2 5 4 : Drain D1 5 : Source 6 : Drain D2 3 4 Schematic 6 1 5 2 4 Start of commercial production 1995-06 2019 1 2019-06-24 Toshiba Electronic Devices & Storage Corporation TLP597G Absolute Maximum Ratings (Ta = 25C) Characteristic Symbol Rating Unit Forward current I 50 mA F Forward current derating (Ta 25C) I / C -0.5 mA / C F Peak forward current (100 s pulse, 100 pps) I 1 A FP Reverse voltage V 5 V R Input power dissipation PD 50 mW Input power dissipation derating (Ta 25C) PD/C -0.5 mW/C Junction temperature T 125 C j Off-state output terminal voltage V 350 V OFF A connection 120 On-state RMS current B connection I 120 mA ON C connection 160 A connection -1.2 On-state current derating B connection I / C -1.2 mA / C ON (Ta 25C) C connection -1.6 A connection 454 B connection 331 Output power dissipation Po mW C connection 307 A connection Output power dissipation -4.54 B connection -3.31 derating (Ta 25C) Po/C mW/C C connection -3.07 Junction temperature T 125 C j Storage temperature range T -55 to 125 C stg Operating temperature range T -40 to 85 C opr Lead soldering temperature (10 s) T 260 C sol Isolation voltage (AC, 60 s, R.H. 60 %) (Note 1) BV 2500 V S rms Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). (Note 1): Device considered a two-terminal device: Pins 1, 2 and 3 shorted together and pins 4, 5 and 6 shorted together. Recommended Operating Conditions Characteristic Symbol Min Typ. Max Unit Supply voltage V 280 V DD Forward current I 5 7.5 25 mA F On-state current I 120 mA ON Operating temperature T -20 65 C opr Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2019 2 2019-06-24 Toshiba Electronic Devices & Storage Corporation Detector LED