TLP748J TOSHIBA Photocoupler GaAs IRed & Photo-Thyristor TLP748J Office Machine Unit: mm Household Use Equipment Solid State Relay Switching Power Supply The TOSHIBA TLP748J consists of a photo thyristor optically coupled to a gallium arsenide infrared emitting diode in a six lead plastic DIP package. Peak OFFstate voltage: 600 V (min) Trigger LED current: 10 mA (max) ONstate current: 150 mA (max) UL recognized: UL1577, file no. E67349 BSI approved: BS EN60065:2002, BS EN60950-1:2006 SEMKO approved: EN60065:2002, EN60950-1:2006 Isolation voltage: 4000 Vrms (min) JEDEC Option (D4) type VDE approved: DIN EN 60747-5-2 JEITA Maximum operating insulation voltage: 890 V pk TOSHIBA 117A8 Highest permissible over voltage: 8000 V pk Weight: 0.42 g (typ.) (Note) When a EN 60747-5-2 approved type is needed, Pin Configuration (top view) please designate the option (D4) 7.62 mm pitch 10.16 mm pitch 1 6 standard type TLPxxxxF type Creepage distance: 7.0 mm (min) 8.0 mm (min) 2 5 Clearance: 7.0 mm (min) 8.0 mm (min) Insulation thickness: 0.4 mm (min) 0.4 mm (min) 3 4 1 : ANODE 2 : CATHODE 3 : N.C. 4 : CATHODE 5 : ANODE 6 : GATE Start of commercial production 2008/12 1 2014-09-01 TLP748J Absolute Maximum Ratings (Ta = 25C) Characteristic Symbol Rating Unit Forward current I 50 mA F Forward current derating (Ta 53 C) I / C 0.7 mA / C F Peak forward current (100 s pulse, 100 pps) I 1 A FP Reverse voltage V 5 V R Peak forward voltage (R = 27 k) V 600 V GK DRM Peak reverse voltage (R = 27 k) V 600 V GK RRM ONstate current I 150 mA T(RMS) ONstate current derating (Ta 25C) I / C 2.0 mA / C T Peak ONstate current (100 s pulse, 120 pps) I 3 A TP Peak one cycle surge current I 2 A TSM Peak reverse gate voltage V 5 V GM Storage temperature range T 55 to 125 C stg Operating temperature range T 40 to 100 C opr Lead soldering temperature (10 s) T 260 C sol Isolation voltage (AC, 1 minute, R.H. 60%) (Note 1) BV 4000 V S rms Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Device Considered a two terminal device: pins 1, 2 and 3 shorted together and pins 4, 5 and 6 shorted together. Recommended Operating Conditions Characteristic Symbol MinTyp.MaxUnit Supply voltage V 240 V AC ac Forward current I 15 25 mA F Operating temperature T 25 85 C opr Gate to cathode resistance R 10 27 k GK Gate to cathode capacity C 0.01 0.1 F GK Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2 2014-09-01 Detector LED