TLPN137,TLPN137(LF1) Photocouplers GaAAs Infrared LED & Photo IC TLPN137,TLPN137(LF1)TLPN137,TLPN137(LF1)TLPN137,TLPN137(LF1)TLPN137,TLPN137(LF1) 1. 1. ApplicationsApplications 1. 1. ApplicationsApplications Factory Automation (FA) High-Speed Digital Interfacing Measuring Instruments 2. 2. 2. 2. GeneralGeneralGeneralGeneral The Toshiba TLPN137 consists of a high-output GaAAs light-emitting diode coupled with integrated high gain, high-speed photodetectors. It is housed in the DIP8 package. The TLPN137 succeeds the 6N137 which has been released. The characteristics of the TLPN137 are similar as the 6N137. The TLPN137 has an internal Faraday shield that provides a guaranteed common-mode transient immunity of 10 kV/s. 3. 3. FeaturesFeatures 3. 3. FeaturesFeatures (1) Inverter logic type (open collector output) (2) Package: DIP8 (3) Operating temperature: -40 to 85 (4) Supply voltage: 4.5 to 5.5 V (5) Data transfer rate: 10 MBd (typ.) (NRZ) (6) Threshold input current: 5.0 mA (max) (7) Supply current: 4.0 mA (max) (8) Common-mode transient immunity: 10 kV/s (min) (9) Isolation voltage: 5000 Vrms (min) (10) Safety standards UL-approved: UL1577, File No.E67349 cUL-approved: CSA Component Acceptance Service No.5A File No.E67349 (Note 1) VDE-approved: EN60747-5-5, EN60065 or EN60950-1 (Note 1)(Note 1)(Note 1) (Note 1) : EN62368-1 (Pending) (Note 1)(Note 1)(Note 1) Option (D4) Note 1: When a VDE approved type is needed, please designate the Option (D4)Option (D4)Option (D4). Start of commercial production 2011-09 2016-2017 2017-08-21 1 Toshiba Electronic Devices & Storage Corporation Rev.2.0TLPN137,TLPN137(LF1) 4. 4. 4. 4. Packaging (Note)Packaging (Note)Packaging (Note)Packaging (Note) TLPN137 TLPN137(LF1) 11-10C401S 11-10C4S Note: Lead-formed product: (LF1) 5. 5. 5. 5. Pin AssignmentPin AssignmentPin AssignmentPin Assignment 1: N.C. 2: Anode 3: Cathode 4: N.C. 5: GND 6: V (Output) O 7: N.C. 8: V CC 6. 6. 6. 6. Internal Circuit (Note)Internal Circuit (Note)Internal Circuit (Note)Internal Circuit (Note) Note: A 0.1-F bypass capacitor must be connected between pin 8 and pin 5. 2016-2017 2017-08-21 2 Toshiba Electronic Devices & Storage Corporation Rev.2.0