TODX2353(F) Toshiba

TODX2353(F) FIBER OPTIC TRANSCEIVING MODULE TODX2353(F) GENERAL PURPOSE OPTICAL TRANSCEIVING MODULE Based on JIS F07(PN) type fiber optic connector 650nm LED Low current LED drive ATC (Automatic Threshold Control) circuit built-in. 1. Absolute Maximum Ratings (Ta = 25C) Characteristics Symbol Rating Unit Storage Temperature T 40 to 95 C stg Operating Temperature T 40 to 85 C opr Forward Current (DC) I DC 30 mA F Reverse Voltage V MAX 5 V R Supply Voltage V -0.5 to 6 V CC High Level Output Current I -1 mA OH Low Level Output Current I 20 mA OL Soldering Temperature T 260 (Note 1) C sol Note 1: Soldering time 10 s (More than 1 mm apart from the package). Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature , etc) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e.operating temperature/ current/ voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/ Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). 2. Operating Ranges Characteristics Symbol Min Typ. Max Unit Forward Current (DC) I - 1.5 10 mA F Supply Voltage V 4.75 5.0 5.25 V CC Data Rate DC - 500 kb/s High Level Output Current I - - -0.8 mA OH Low Level Output Current I - - 0.8 mA OL Start of commercial production 2015-02 1 2015-01-15 TODX2353(F) 3. Electrical and Optical Characteristics (Ta = 25C, V = 5 V) CC Characteristics Symbol Test Condition Min Typ. Max Unit Data Rate NRZ Code(Note 2) DC 500 kb / s - Transmission Distance (Note 2) APF(Note 3), Using TODX2353(F) 0.2 10 m - Pulse Width Distortion (Note 4) t w -30 30 % - Fiber Output Power (Note 5) P I =1.5mA, Using APF (Note3), -17 -12 dBm F - f Center Emission Wavelength c 650 - nm - Forward Voltage V I =1.5mA - 1.75 2.2 V F F Reverse Current I V =5V - 10 A R R - Maximum Receivable Power (Note 6) P APF(Note 3), DC to 500kb/s dBm MAX -11 - - Minimum Receivable Power (Note 6) P APF(Note 3), DC to 500kb/s - -23.5 dBm MIN - Active I (1) 0.3 1.5 mA CC - (Optical flux on) Current Consumption Standby I (2) 20 30 A CC - (No optical flux on) High Level Output Voltage V 4.8 - V OH 4.2 Low Level Output Voltage V 0.2 0.4 V OL - Note 2: Data rate and transmission distance differ from driver circuit. High level output when optical flux is received. Low level output when it is not received. Note 3: All Plastic Fiber (980 m core / 1000 m cladding, NA=0.5). Polished surface. Note 4: Between input of driver circuit of TODX2353(F) and output of TODX2353(F). A value changes with LED drive circuits. Note 5: Measure with a standard optical fiber with fiber optic connectors. Valued by peak. -9 Note.6: BER10 , Valued by peak. 4. Application Circuit Fiber Optic Connector Insertion Side Soldered to Soldered to PC board Fiber Optic TransceivingModule PC board Less than 7mm 0.1F NC Vcc Vcc Input Output (Bottom View) 2 2015-01-15 2.2k HC04 0.1F Vcc 47F