231275 Vermason

Product Information No: PIS 042 Page 1 of 1 Issue No 4 Date May 2003 Approved by EARTH BONDING POINT BAR Code J6501 to J6535 Farnell Part No 433-147 / 433-160 The EBP bar should be fixed to the edge of a bench or other suitable work equipment within reach and accessible to all connecting ground cords, but where it is unlikely to be knocked and damaged or hinder the operator. Mount EBP bar with two M5 pan-head screws, minimum 12mm long Connect earthing cord to a suitable earth. A spare ring terminal is supplied if the cord needs to be shortened. The bar is 72 x 37 x 38mm in size and is made of ABS. It can be supplied in grey or yellow. The yellow bar has a rear cover to prevent access to the resistors. The bars are available with a variety of connectors: 4, 7 or 10mm stud 4mm female or male safety socket. Maximum three connectors per bar. Resistors are usually built-in to each connector. The resistors are 1M 5% rated at 1W. They will withstand 500V DC for over 6 minutes. For further information, please contact Vermason Ltd, 1 Avenue One, Letchworth, Hertfordshire SG6 2HB. UK Tel: +44(0)1462 672005 Fax: +44(0)1462 670440 e-mail : sales vermason.co.uk www.vermason.co.ukX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for vermason manufacturer: Other Similar products are found below : 203015 237670 230260 238711 35594 230660 072425B 50424 242296 229775 J6609 VER-29082 47200 231725 231250 242270 47201 230480 203065 237200 229100 249205 230310 229795 230647 230370 231275 237675 231280 35267 242278 231345 35595 229135 230646 VER-26457 230420 35592 35622 241030 241100 ASBB4