Description The Vermason Slim Earth Bonding Point Bar (or Common Ground Point) has been designed to be installed underneath bench tops where it will be accessible to all connecting ground cords and where it is unlikely to be knocked and damaged or hinder the operator. With a width of only 15mm it is especially suitable for benches with narrow edges. The product is supplied with reverse-mounted screws held in position by self-retaining washers, thereby making the installation process simple. The distance between screw centres is 89mm. The design of the ABS plastic moulding provides strength to the assembly and the rounded corners ensure comfort during use for the operator. Connect earthing cord (3m long) to a earth protective ground. A spare ring terminal is supplied if the cord needs to be shortened. Resistors are built-in to each connector. The normal earth contact is linked via individual 1 megohms resistor rated at 1/2W. In the event of a workstation element becoming live the resistor will limit the fault current to less than 0.3mA at 240V. The resistor is capable of withstanding 500VDC for 6 minutes. Per EN 61340-5-2 paragraph 5.1.1 A nominal 1 megohms resistor is commonly used in wrist straps and to ground work surfaces. In the event of an operator touching an energized conductor, for the normal mains electricity supplies this resistor will limit the current flowing through the person to less than 0.5mA. Current limiting or cut-off devices should also be considered and in some areas may be demanded by legislation. Item Description The operator connects the wriststrap to the male snap stud via a coiled cord. A second stud can VER-26989 EBP, SLIM BAR, 3M CORD, 3x10MM be used to connect a working surface. The third connection is available for guest use or to ground another item such as a trolley. Periodic verification of the ground path should be part of the ESD STUDS control program. The protection of ESDS ESD sensitive item is accomplished by providing a ground path to bring ESD protective materials and personnel to the same electrical potential. All conductor and dissipative items in the environment, including personnel, shall be bonded or electrically connected to a known ground or common connection point Earth Bonding Point . CLC/TR 61340-5-2 User guide clause 4.4.1 Grounding/bonding Made in the Specifications and procedures subject to change without notice. systems Introduction United Kingdom Slim EBP Bar VERMASON DATE: Drawing Number UNIT C, 4TH DIMENSION, FOURTH AVENUE, LETCHWORTH, HERTS, SG6 2TD UK September VER-26989 PHONE: +44 (0) 1462-672005 E-MAIL: Service Vermason.co.uk, INTERNET: Vermason.co.uk 2015 2015 VERMASON.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for vermason manufacturer: Other Similar products are found below : 203015 237670 230260 238711 35594 230660 072425B 50424 242296 229775 J6609 VER-29082 47200 231725 231250 242270 47201 230480 203065 237200 229100 249205 230310 229795 230647 230370 231275 237675 231280 35267 242278 231345 35595 229135 230646 VER-26457 230420 35592 35622 241030 241100 ASBB4