333 3 CDHV www.vishay.com Vishay Techno Thick Film Chip Dividers, High Voltage FEATURES High voltage up to 3000 V Typical resistance ratios of 250:1 to a maximum Available resistance ratio of 500:1 Available Flow solderable Tape and reel packaging available Termination style: 3-sided wraparound termination or single termination flip chip available Suitable for solderable, epoxy bondable, or wire bondable applications LINKS TO ADDITIONAL RESOURCES Termination material: solder-coated nickel barrier or solder coated non-magnetic terminations standard gold, palladium silver, platinum gold, platinum silver or platinum 3D Models Footprints palladium gold terminations available Multiple styles, termination materials and configurations, allow wide design flexibility Epoxy bondable or wire bondable non-magnetic terminations available Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details STANDARD ELECTRICAL SPECIFICATIONS MAXIMUM TEMPERATURE POWER RATING RESISTANCE (3) (4) GLOBAL CASE WORKING TOLERANCE COEFFICIENT TCR TRACKING (2) P RANGE 70 C (1) MODEL SIZE VOLTAGE % (-55 C to +155 C) ppm/C W V ppm/C CDHV 2512 2512 1 3000 20M to 20G 1, 2, 5, 10, 20 100 50 (typical) Notes (1) Continuous working voltage shall be P x R or maximum working voltage, whichever is less (2) Resistance values below 1 G are calibrated at 100 V , and values of 1 G and above are calibrated at 1000 V . Calibration at other DC DC voltages available upon request (3) Contact factory for tighter tolerances (4) Reference only: not for all values specified. Consult factory for your value VOLTAGE AND TEMPERATURE COEFFICIENTS OF RESISTANCE CHART TYPICAL RESISTANCE () RATIO (TYPICAL) VCR (ppm/V) TCR (ppm/C) -55 C to +155 C 20M 250:1 10 100 150M 300:1 10 150 800M 500:1 10 200 Note Contact factory for other ratios Revision: 19-May-2021 Document Number: 68020 1 For technical questions, contact: te1resistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D CDHV www.vishay.com Vishay Techno GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CDHVAF20M0J2500GFB (preferred part number format) C DH VA F 2 0 M0 J 250 0 G F B GLOBAL TERM TERM RESISTANCE RATIO RATIO SOLDER TOLERANCE PACKAGING MODEL STYLE MATERIAL VALUE (R ) (R + R ) / R TOLERANCE TERMINATION 1 1 2 2 CDHV = A = F = nickel barrier M = M F = 1 % 3 digit G = 2 % E = Sn100 B = bulk CDHV2512 3-sided G = non-magnetic G = G G = 2 % significant H = 3 % F = Sn95/Ag5, (250 pcs max.) B = top A = palladium 20M0 = 20 M J = 5 % figure, followed J = 5 % HSD F = T / R only silver 800M = 800 M K = 10 % by a multiplier N = no solder (full reel) B = platinum gold 1G00 = 1 G M = 20 % 0500 = 50:1 S = Sn62 / 1 = T / R C = gold 2500 = 250:1 Pb36 / Ag2, (1000 pcs) D = platinum 3000 = 300:1 HSD 5 = T / R silver 5000 = 500:1 T = Sn90 / Pb10 (500 pcs) E = platinum T = T / R palladium gold (250 pcs min.) W = waffle tray Historical Part Numbering: CDHV2512AF2005J2500Ge2 (will continue to be accepted) CDHV2512 A F 2005 J 2500 G e2 HISTORICAL TERM TERM RESISTANCE RATIO RATIO SOLDER TOLERANCE MODEL STYLE MATERIAL VALUE (R ) (R + R ) / R TOLERANCE TERMINATION 1 1 2 2 Note For additional information on packaging, refer to the Surface Mount Resistor Packaging document (www.vishay.com/doc 31543) MATERIAL SPECIFICATIONS Resistive element Ruthenium oxide Encapsulation Glass Substrate 96 % alumina Solder-coated nickel barrier or solder coated non-magnetic terminations standard. Termination Gold, palladium silver, platinum gold, platinum silver, platinum palladium gold terminations available. Solder finish Pure tin or tin / lead solder alloys standard. Tin / silver or tin / lead / silver solder alloys available. ENVIRONMENTAL SPECIFICATIONS Operating temperature -55 C to +155 C Life Less than 0.5 % change when tested at full rated power Note Reference only: not for all values specified. Consult factory for your size and value Revision: 19-May-2021 Document Number: 68020 2 For technical questions, contact: te1resistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000