Control DG2730 www.vishay.com Vishay Siliconix 2 Port, USB 2.0 High Speed (480 Mbps) Switch, DPDT Analog Switch DESCRIPTION FEATURES The DG2730 is 2 port high speed analog switch optimized Wide operation voltage range for USB 2.0 signal switching. The DG2730 switch is Low on-resistance, 5.5 (typical at 3 V) configured in DPDT. It handles bidirectional signal flow, Low capacitance, C = 5.8 pF (typical) ON achieving a 900 MHz -3 dB bandwidth, a port to port crosstalk at -36 dB and isolation at -29 dB, measured at 3 dB high bandwidth: 900 MHz (typical) 240 MHz. Low bit to bit skew: 40 ps (typical) Processed with high density sub micron CMOS, the Low power consumption DG2730 provide low parasitic capacitance. Signals are routed with minimized phase distortion and attain a bit to bit Low logic threshold: V skew is as low as 40 ps. Power down protection: D+/D- pins can tolerate up to The DG2730 is designed for a wide range of operating 5.5 V when V+ = 0 V voltages, from 2.7 V to 5.5 V that can be driven directly 5.5 kV ESD protection (HBM) from one cell Li-ion battery or 5 V power supply. On-chip circuitry protects against conditions when either the D+ / D- Latch-up current 500 mA per JESD78 lines are shorted to the V at the USB port. Additionally, BUS Lead (Pb)-free low profile miniQFN-10 (1.4 mm x 1.8 mm logic control pins (S and OE) can tolerate the presence of x 0.55 mm) voltages that are above the supply power rail (V+). The control logic threshold is guaranteed to be (V = 1.3 V/min Material categorization: for definitions of compliance IH up to V+ = 3.6 V). Latch up current is 500 mA, as per please see www.vishay.com/doc 99912 JESD78, and its ESD tolerance exceeds 5.5 kV. Packaged in ultra small miniQFN-10 (1.4 mm x 1.8 mm x 0.55 mm), it is ideal for portable high speed mix signal APPLICATIONS switching application. Cellular phones As a committed partner to the community and the Portable media players environment, Vishay Siliconix manufactures this product with lead (Pb)-free device termination. The miniQFN-10 PDA package has a nickel-palladium-gold device termination Digital camera and is represented by the lead (Pb)-free -GE4 suffix to the ordering part number. The nickel-palladium-gold device GPS terminations meet all JEDEC standards for reflow and MSL Notebook computer rating. TV, monitor, and set top box As a further sign of Vishay Siliconixs commitment, the DG2730 is fully RoHS-complaint. FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION miniQFN-10L 7 6 5 HSD2+ OE 8 5x V+ HSD2- 9 4 Pin 1 Device marking: 5x for DG2730 S 10 3 GND x = Date/Lot Traceability Code 1 2 Pin 1: LONG LEAD Top View S17-0074-Rev. G, 23-Jan-17 Document Number: 67786 1 For technical questions, contact: analogswitchtechsupport vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 HSD1+ D+ D- HSD1-DG2730 www.vishay.com Vishay Siliconix ORDERING INFROMATION TEMP. RANGE PACKAGE PART NUMBER -40 C to 85 C miniQFN-10 DG2730DN-T1-GE4 TRUTH TABLE PIN DESCRIPTIONS OE (PIN 8) S (PIN 10) FUNCTION PIN NAME DESCRIPTION 0 1 D+ = HSD1+ and D- = HSD1- OE Bus switch enable 0 0 D+ = HSD2+ and D- = HSD2- S Select input 1 X Disconnect HSD1, HSD2, D Data port ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise noted) A PARAMETER LIMIT UNIT V+ -0.3 to 6 Reference to GND V a S, OE, D, HSD1, HSD2 -0.3 to (V+ + 0.3) Current (Any Terminal Except S, OE, D, HSD1, HSD2) 30 Continuous Current (S, OE, D, HSD1, HSD2) 250 mA Peak Current (Pulsed at 1 ms, 10 % duty cycle) 500 Storage Temperature (D suffix) -65 to +150 C b c Power Dissipation (Packages) miniQFN-10 208 mW ESD (Human body model) 5.5 kV Latch-Up (Current injection) 500 mA Notes a. Signals on S, OE, D, HSD1, HSD2 exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads welded or soldered to PC board. c. Derate 2.6 mW/C above 70 C. Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. S17-0074-Rev. G, 23-Jan-17 Document Number: 67786 2 For technical questions, contact: analogswitchtechsupport vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000