OLED-128O064J-LPP3N00000 www.vishay.com Vishay 128 x 64 Graphic OLED FEATURES Type: graphic Display format: 128 x 64 dots Built-in controller: SSD1309Z Duty cycle: 1/64 +3 V power supply Interface: 6800, option 8080 and SPI With polarizer Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 MECHANICAL DATA ABSOLUTE MAXIMUM RATINGS ITEM STANDARD VALUE UNIT STANDARD VALUE Module dimension 75.0 x 52.7 x 8.5 ITEM SYMBOL UNIT MIN. MAX. Viewing area 57.01 x 29.49 Supply voltage V -0.3 4 V DD Active area 55.01 x 27.49 for logic mm Operating Dot size 0.40 x 0.40 T -40 +80 OP temperature C Dot pitch 0.43 x 0.43 Storage T -40 +80 STG temperature Mounting hole n/a Note Maximum ratings are those values beyond which damages to the device may occur. Functional operation should be restricted to the limits in the Electrical Characteristics tables or Pin Description section. This device may be light sensitive. Caution should be taken to avoid exposure of this device to any light source during normal operation. This device is not radiation protected ELECTRICAL CHARACTERISTICS STANDARD VALUE ITEM SYMBOL CONDITION UNIT MIN. TYP. MAX. Supply voltage for logic V - 2.8 3.0 3.3 DD Input high voltage V - 0.8 V -- IH DD Input low voltage V - - - 0.2 V V IL DD Output high voltage V - 0.9 V -- OH DD Output low voltage V - - - 0.1 V OL DD 50 % check board operating current I V = 3.0 V 130 135 150 mA DD DD OPTIONS EMITTING COLOR YELLOW GREEN RED BLUE WHITE Yes ---- INTERFACE PIN FUNCTION PIN NO. SYMBOL FUNCTION 1V Power supply pin for core logic operation DD Revision: 29-Jun-17 Document Number: 37918 1 For technical questions, contact: displays vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 OLED-128O064J-LPP3N00000 www.vishay.com Vishay INTERFACE PIN FUNCTION PIN NO. SYMBOL FUNCTION 2V Ground SS 3NC No connection 4 to 11 D0 to D7 Data bus This pin is the chip select input connecting to the MCU. 12 CS The chip is enabled for MCU communication only when CS is pulled low (active low). 13 NC No connection This pin is reset signal input. 14 RES When the pin is pulled low, initialization of the chip is executed. Keep this pin pull high during normal operation. This pin is read / write control input pin connecting to the MCU interface. 15 R / W When 8080 interface mode is selected, this pin is pulled low and the chip is selected 16 D / C This pin is data / command control pin connecting to the MCU. This pin is MCU interface input. 17 E When 8080 interface mode is selected, this pin is pulled low and the chip is selected 18 NC No connection 19 DISP Display off 20 NC No connection Note 80 Series Interface is default DIMENSIONS in millimeters 75.00 0.5 70.00 66.80 2.50 58.50 4.10 8.5 max. 9.00 57.01 (VA) 8.99 55.01 (AA) 10.00 4.0 43.60 2 x 2.5 PTH 2 x 4.0 PAD EVA 128 x 64 dots Double-sided tape CON1 1 20 2 x 2.5 PTH 20 x 1.0 PTH 1.00 2 x 4.0 PAD 13.37 P 2.54 x 19 = 48.26 0.43 0.40 The non-specified tolerance of dimen sion is 0.3 mm. Detail dots scale 10:1 Revision: 29-Jun-17 Document Number: 37918 2 For technical questions, contact: displays vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 2 x 1.2 52.70 49.70 41.30 0.50 30.80 1.44 29.49 (VA) 10.79 0.43 27.49 (AA) 11.51 0.40 2.50 0.5