SiC830, SiC830A www.vishay.com Vishay Siliconix 80 A VRPower , Smart Power Stage With Current Sensing and Temperature Monitor (Datasheet in Brief) FEATURES Thermally enhanced PowerPAK MLP56-39L package Optimize MOSFET switching performance with integrated Schottky diode in LS MOSFET Up to 80 A continuous current High frequency operation up to 2 MHz Power MOSFETs optimized for 12 V to 19 V input stage and 10 % to 15 % duty cycle operation 3.3 V / 5 V PWM logic with tri-state and hold-off PWM minimum controllable on time of 30 ns DESCRIPTION Diode emulation mode at light loads for high efficiency The SiC830 is an integrated power stage solution optimize d over the full load range using GLCTRL pin for synchronous buck applications to offer high current, high Low PWM propagation delay (< 20 ns) efficiency, and high power density performance. Packaged Current sense monitor (I ) MON in Vishay s 5 mm x 6 mm MLP package, SiC830 enables Temperature monitor (T ) MON voltage regulator design to deliver in excess of 80 A pe r Over temperature alert phase current. HS MOSFET over-current and short alert The internal power MOSFETs utilize Vishay s Under voltage lockout for V and BOOT DRV state-of-the-art TrenchFET Gen IV technology that delivers industry bench mark performance to significantly reduce Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 switching and conduction losses. The SiC830 incorporates an advanced MOSFET gate driver APPLICATIONS IC that features high current driving capability, adaptive Synchronous buck converters dead-time control, and integrated bootstrap switch, a thermal monitor that alerts the system of excessive junction Multi-phase VRDs for CPU, GPU, and memory temperature. This driver is also compatible with wide rang e DC/DC VR modules of PWM controllers with the support of both 3.3 V and 5 V PWM logic with tri-state. Diode emulation mode can be EFFICIENCY enabled at light loads through the use of GLCTRL signal. Axis Title The device also integrates a current monitor to provide a real 96 10000 time scale down of inductor current (I ). A temperatur e MON V = 1.8 V, F = 600 kHz O SW monitor provides the system an indication of the power 94 V = 1.8 V, F = 800 kHz O SW stage internal temperature (T ) and can be used to MON 92 throttle the system operation down to a safer level if needed. 1000 The device also integrates fault alerts such as HS FET 90 overcurrent, over temperature and HS MOSFET short V = 1.2 V, F = 800 kHz O SW 88 failures. V = 1.2 V, F = 600 kHz 86 O SW 100 84 82 80 10 0 10203040 I - Output Current (A) OUT Fig. 1 - Efficiency vs. Output Current (V = 12 V, L = 150 nH, V = V = 5 V) IN CC DRV S21-0594-Rev. E, 14-Jun-2021 Document Number: 77047 1 For technical questions, contact: powerictechsupport vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 2nd line eff - Efficiency (%)SiC830, SiC830A www.vishay.com Vishay Siliconix PRODUCT SUMMARY Part number SiC830 SiC830A 80 A smart power stage, 4.5 V to 19 V , 80 A smart power stage, 4.5 V to 19 V , IN IN IN IN Description 5 V P with diode emulation mode 3.3 V P with diode emulation mode WM WM Input voltage min. (V) 4.5 4.5 Input voltage max. (V) 19 19 Continuous current rating max. (A) 80 80 Switch frequency max. (kHz) 2000 2000 Enable (yes / no) No No Monitoring features T , I T , I MON MON MON MON Protection UVLO, OTP, OC flag UVLO, OTP, OC flag Light load mode SMOD SMOD Pulse-width modulation (V) 5 3.3 Package type PowerPAK MLP39-65 PowerPAK MLP39-65 Package size (W, L, H) (mm) 5.0 x 6.0 x 0.75 5.0 x 6.0 x 0.75 Status code 1 1 Product type VRPower (DrMOS) VRPower (DrMOS) Applications Computer, industrial, networking Computer, industrial, networking To request the full version of the datasheet, please contact: ICmarketing vishay.com Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package / tape drawings, part marking, and reliability data, see www.vishay.com/ppg 77047. S21-0594-Rev. E, 14-Jun-2021 Document Number: 77047 2 For technical questions, contact: powerictechsupport vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000