333 3 SM15T Series www.vishay.com Vishay General Semiconductor Surface Mount TRANSZORB Transient Voltage Suppressors FEATURES Available Low profile package Ideal for automated placement Glass passivated chip junction Available in unidirectional and bidirectional 1500 W peak pulse power capability with a 10/1000 s waveform Available SMC (DO-214AB) Excellent clamping capability Cathode Anode Low inductance Meets MSL level 1, per J-STD-020, LF maximum peak (unidirectional) (bidirectional) of 260 C AEC-Q101 qualified available LINKS TO ADDITIONAL RESOURCES - Automotive ordering code: base P/NHE3 or P/NHM3 Material categorization: for definitions of compliance 3D Models please see www.vishay.com/doc 99912 TYPICAL APPLICATIONS PRIMARY CHARACTERISTICS Use in sensitive electronics protection against voltage V 5.8 V to 188 V WM transients induced by inductive load switching and lightin g V unidirectional 6.8 V to 220 V BR on ICs, MOSFET, signal lines of sensor units for consumer, V bidirectional 6.8 V to 220 V BR computer, industrial, automotive, and telecommunication. P 1500 W PPM MECHANICAL DATA P 6.5 W D Case: SMC (DO-214AB) I (uni-directional only) 200 A FSM Molding compound meets UL 94 V-0 flammability rating T max. 150 C J Base P/N-E3 - RoHS-compliant and commercial grad e Polarity Unidirectional, bidirectional Base P/N-M3 - halogen-free, RoHS-compliant, commercial Package SMC (DO-214AB) grade Base P/NHE3 X - RoHS-compliant and AEC-Q101 qualified DEVICES FOR BIDIRECTION APPLICATIONS Base P/NHM3 X - halogen-free, RoHS-compliant, and For bidirectional devices use CA suffix (e.g. SM15T12CA). AEC-Q101 qualified Electrical characteristics apply in both directions. ( X denotes revision code e.g. A, B, ...) Terminals: matte tin plated leads, solderable per APPLICATION NOTES J-STD-002 and JESD 22-B102 A 1500 W (SMC) device is normally selected when the threa t E3, M3, HE3, and HM3 suffix meets JESD 201 class 2 of transients is from lightning induced transients, conducte d whisker test via external leads or I/O lines. It is also used to protect Polarity: for unidirectional types the band denotes cathode against switching transients induced by large coils or end, no marking on bidirectional types industrial motors. Source impedance at component level in a system is usually high enough to limit the current within the peak pulse current (I ) rating of this series. In an overstress PP condition, the failure mode is a short circuit. MAXIMUM RATINGS (T = 25 C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT (1)(2) Peak power dissipation with a 10/1000 s waveform (fig. 1) P 1500 W PPM (1) Peak pulse current with a 10/1000 s waveform (fig. 3) I See next table A PPM Power dissipation on infinite heatsink at T = 50 C P 6.5 W A D (2) Peak forward surge current 10 ms single half sine-wave uni-directional only I 200 A FSM Operating junction and storage temperature range T , T -65 to +150 C J STG Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 C per fig. 2 A (2) Mounted on 0.31 x 0.31 (8.0 mm x 8.0 mm) copper pads to each terminal Revision: 19-Apr-2021 Document Number: 88380 1 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D SM15T Series www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (T = 25 C unless otherwise noted) A BREAKDOWN CLAMPING CLAMPING LEAKAGE DEVICE TEST STAND-OFF VOLTAGE VOLTAGE VOLTAGE CURRENT T MARKING CURRENT VOLTAGE (2) (1) V AT I V AT I V AT I BR T C PPM C PPM TYPE I AT V MAX. RM RM CODE I V T RM (3) -4 (V) (10/1000 s) (8/20 s) I 10 /C D (mA) (V) (A) UNI BI MIN. MAX. (V) (A) (V) (A) SM15T6V8A GDE7 GDE7 6.45 7.14 10 5.80 1000 10.5 143 13.4 746 5.7 SM15T7V5A GDK7 BDK7 7.13 7.88 10 6.40 500 11.3 132 14.5 690 6.1 SM15T10A GDT7 BDT7 9.50 10.5 1.0 8.55 10 14.5 103 18.6 538 7.3 SM15T12A GDX7 BDX7 11.4 12.6 1.0 10.2 5.0 16.7 90.0 21.7 461 7.8 SM15T15A GEG7 GEG7 14.3 15.8 1.0 12.8 1.0 21.2 71.0 27.2 368 8.4 SM15T18A GEM7 BEM7 17.1 18.9 1.0 15.3 1.0 25.2 59.5 32.5 308 8.8 SM15T22A GET7 BET7 20.9 23.1 1.0 18.8 1.0 30.6 49.0 39.3 254 9.2 SM15T24A GEV7 GEV7 22.8 25.2 1.0 20.5 1.0 33.2 45.0 42.8 234 9.4 SM15T27A GEX7 BEX7 25.7 28.4 1.0 23.1 1.0 37.5 40.0 48.3 207 9.6 SM15T30A GFE7 BFE7 28.5 31.5 1.0 25.6 1.0 41.5 36.0 53.5 187 9.7 SM15T33A GFG7 GFG7 31.4 34.7 1.0 28.2 1.0 45.7 33.0 59.0 169 9.8 SM15T36A GFK7 BFK7 34.2 37.8 1.0 30.8 1.0 49.9 30.0 64.3 156 9.9 SM15T39A GFM7 BFM7 37.1 41.0 1.0 33.3 1.0 53.9 28.0 69.7 143 10.0 SM15T68A GGG7 GGG7 64.6 71.4 1.0 58.1 1.0 92.0 16.3 121 83 10.4 SM15T100A GGV7 GGV7 95.0 105 1.0 85.5 1.0 137 11.0 178 56 10.6 SM15T150A GHK7 GHK7 143 158 1.0 128 1.0 207 7.20 265 38 10.8 SM15T200A GHR7 GHR7 190 210 1.0 171 1.0 274 5.50 353 28 10.8 SM15T220A GHR8 GHR8 209 231 1.0 188 1.0 328 4.60 388 26 10.8 Notes (1) For bidirectional devices add suffix CA instead of A (2) V measured after I applied for 300 s square wave pulse BR T (3) For bi-polar devices with V = 10 V or under, the I limit is doubled RM RM THERMAL CHARACTERISTICS (T = 25 C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT (1) Typical thermal resistance, junction to ambient air R 75 JA C/ W Typical thermal resistance, junction to lead R 15 JL Note (1) Mounted on minimum recommended pad layout ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SM15T10A-E3/57T 0.211 57T 850 7 diameter plastic tape and reel SM15T10A-M3/57T SM15T10A-E3/9AT 0.211 9AT 3500 13 diameter plastic tape and reel SM15T10A-M3/9AT (1) SM15T10AHE3 A/H 0.211 H 850 7 diameter plastic tape and reel (1) SM15T10AHM3 A/H (1) SM15T10AHE3 A/I 0.211 I 3500 13 diameter plastic tape and reel (1) SM15T10AHM3 A/I Note (1) AEC-Q101 qualified Revision: 19-Apr-2021 Document Number: 88380 2 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000