VBUS05B1-SD0HG4-08 Vishay

VBUS05B1-SD0 www.vishay.com Vishay Semiconductors Ultra Low Capacitance Bidirectional Symmetrical (BiSy) Single Line ESD Protection Diode in Silicon Package FEATURES Ultra compact CLP0603 package Low package height < 0.3 mm 0.27 1-line ESD protection AEC-Q101 qualified available Working range 5.5 V 22543 Low leakage current < 0.05 A 0.6 0.3 22544 Ultra low load capacitance C = 0.29 pF typ. D ESD immunity acc. IEC 61000-4-2 MARKING (example only) 16 kV contact discharge 16 kV air discharge Lead plating: Au (e4) 1 XY Lead material: Ni 22454 Backside coating 1 = year code Material categorization: for definitions of compliance Open circle = month code and pin 1 please see www.vishay.com/doc 99912 XY = type code click logo to get started DESIGN SUPPORT TOOLS Models Available ORDERING INFORMATION ENVIRONMENTAL AND QUALITY CODE PACKAGING CODE PART NUMBER RoHS-COMPLIANT + ORDERING CODE 15K PER 7 REEL AEC-Q101 GOLD (EXAMPLE) LEAD (Pb)-FREE TERMINATIONS (EXAMPLE) (8 mm TAPE) QUALIFIED PLATED 15K/BOX = MOQ GREEN VBUS05B1-SD0 - G 4 -08 VBUS05B1-SD0-G4-08 VBUS05B1-SD0 H G 4 -08 VBUS05B1-SD0HG4-08 PACKAGE DATA DEVICE NAME PACKAGE NAME TYPE CODE WEIGHT SOLDERING CONDITIONS Peak temperature max. 260 C VBUS05B1-SD0 CLP0603-2L 5A 0.12 mg Reflow soldering according JEDEC STD-020 ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT Peak pulse current acc. IEC 61000-4-5, 8/20 s/single shot I 2.5 A PPM Pin 1 to pin 2 Peak pulse power P 45 W PP acc. IEC 61000-4-5 t = 8/20 s single shot p Contact discharge acc. IEC 61000-4-2 10 pulses 16 ESD immunity V kV ESD Air discharge acc. IEC 61000-4-2 10 pulses 16 Operating temperature Junction temperature T -55 to +150 C J Storage temperature T -55 to +150 C stg Rev. 1.8, 03-Jan-2019 Document Number: 85899 1 For technical questions, contact: ESDprotection vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VBUS05B1-SD0 www.vishay.com Vishay Semiconductors ESD PROTECTION FOR HIGH-SPEED SIGNAL OR DATA LINES The VBUS05B1-SD0 is a Bidirectional and Symmetrical (BiSy) ESD protection device which clamps positive and negative overvoltage transients to ground. Connected between the signal or data line and the ground the VBUS05B1-SD0 offers a high isolation (low leakage current, low capacitance) within the specified working range. Due to the short leads and small packag e size of the tiny CLP0603 package the line inductance is very low, so that fast transients like and ESD strike can be clamped with minimal over- or undershoots. Due to the very low capacitance the VBUS05B1-SD0 can be used for high speed data ports like HDMI, USB 3.0 or Thunderbolt. ELECTRICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITIONS / REMARKS SYMBOL MIN. TYP. MAX. UNIT Protection paths Number of lines which can be protected N -- 1 lines channel Reverse stand-off voltage Max. reverse working voltage V -- 5.5 V RWM Reverse voltage at I = 0.05 A V 5.5 - - V R R (1) Reverse current at V = 5.5 V I - < 0.0009 0.05 A RWM R Reverse breakdown voltage at I = 1 mA V 6.0 8.5 10 V R BR at I = 1 A V -12 14 V PP C Reverse clamping voltage at I = I = 2.5 A V -15 18 V PP PPM C at V = 0 V f = 1 MHz C - 0.29 0.4 pF R D Capacitance at V = 3.3 V f = 1 MHz C -0.29 - pF R D Transmission Line Pulse (TLP) t = 100 ns p -20- I = 8 A TLP Clamping voltage V V C-TLP Transmission Line Pulse (TLP) t = 100 ns p -29- I = 16 A TLP Dynamic resistance Transmission Line Pulse (TLP) t = 100 ns R -1.14 - p DYN Note (1) Defined by design. Such a low leakage current is too low for a 100 % final test verification Rev. 1.8, 03-Jan-2019 Document Number: 85899 2 For technical questions, contact: ESDprotection vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000