HW-DMB-1-G Xilinx

Alveo Programming Cable User Guide UG1377 (v1.2) September 15, 2020Revision History Revision History The following table shows the revision history for this document. Section Revision Summary 9/15/2020 Version 1.2 Chapter 1: Introduction Updated to include the latest devices that use this cable. Connecting and Disconnecting the Ribbon Cable Added Figure 5: Adapter Card and Figure 6: U25 Adapter Connected to the Alveo U25 Card. Steps to Connect and Program the Alveo Data Center Updated Step 5 to be card agnostic and removed the Select Accelerator Card Memory Device image. Removed the Program Configuration Memory image in Step 7. 12/02/2019 Version 1.1 General updates Revised outline of document Chapter 1: Introduction Updated Figure 1: Alveo Programming Module Interface Locations. Added Note 1 to Table 1: Alveo Programming Module Interface Descriptions. Connecting and Disconnecting the Ribbon Cable Updated Figure 3 photo Connecting the Alveo Programming Module Updated Figure 5, Figure 6, and Figure 7 photos Programming Module Specifications Added adapter specifications 9/17/2019 Version 2019.1 General updates No technical content updates 8/30/2019 Version 2019.1 Chapter 1: Introduction Provided a general overview of the card Provided names of the supported cards and links to each Chapter 2: Prevention ESD Damage Updated Figure 1 Updated Table 1 through Table 4 Chapter 3: Setting Up the System Updated Figure 2 through Figure 7 Revised steps to set up ribbon cable Added Connecting the Alveo Programming Module Chapter 4: Programming the Alveo Card Described how to connect and program the card Appendix A: Board Specifications Added physical descriptions of the board 6/21/2019 Version 2019.1 Initial release. N/A UG1377 (v1.2) September 15, 2020 www.xilinx.com Send Feedback Alveo Programming Cable User Guide 2