8-CHANNEL REMOTE CONTROL P-256/8 MANUAL INSTRUCTION ZAMEL Sp. z o.o. ul. Zielona 27, 43-200 Pszczyna, Poland tel. +48 (32) 210 46 65, fax +48 (32) 210 80 04 www.zamelcet.com, e-mail: marketing zamel.pl TECHNICAL DATA DESCRIPTION 8-channel remote control P-256/8 is a universal transmitter which allows to realise P-256/8 control functions as: lighting control, roller Input rated voltage: 3 V DC blinds opening and closing, entry and ga- rage gates opening/closing, etc. The remote Battery type: CR2032 control is equipped with backlight elements Battery life: 3 5 years (depending on use) which give signal conected with operating and ergonomic silicone keyboard. Number of channels: 8 Transmission: radio 868,32 MHz Coding way: unidirectional FEATURES Coding: addressing transmission Range: up to 300 m in the open area remote control of EXTA FREE system receivers, Optic signalling of transmitting/battery status: 2 x LED red diode possibility of independent control of eight o Ambient temperature range: -10 +55 C receivers, Operating position: free wide range of operation (up to 300 m), battery powered, Casing protection degree: IP20 (EN 60529) modern design, Protection level: III magnet built in device casing which al- lows to mount the remote control to met- Pollution degree: 2 al surface (metal handle in the set), Dimensions: 152 x 43 x 17,5 mm optic signalling of transmitting and bat- Weight: 0,060 kg tery status, possibility of simultaneous switching on/ Reference standard: ETSI EN 300 220-1, switching off any number of EXTA FREE ETSI EN 300 220-2 system receivers. APPEARANCE Optic signalling of transmitters operation Push-buttons The symbol means selective collecting of electrical and electronic equipment. It is forbidden to put the used equipment together with other waste. VER. 003 20.05.2011APPLICATION OPERATION After pressing the push-button the remote control sends a signal on 868,32 MHz which controls EXTA FREE receivers. Device programming procedure (add- ing a transmitter to the transmitters memory) is described in manual in- struction of particular EXTA FREE sys- tem receivers. The range (up to 300 m depending on a receiver) can be changed by means of a retransmitter or few RTN-01 retransmitters. BATTERY CHANGE Battery discharge status is signalled by several LED red diode flashes dur- ing transmission time. 1. Remove the screws from the bottom part of the remote control. 2. Remove the upper cover with the sili- con keyboard. 3. Remove the battery from the latch. 4. Mount a new battery. Watch battery polarisation marked on the latch. Wrong battery mounting may cause device damage. 5. Place back the top cover with the key- P-256/8 remote control can cooperate with any trans- board and tighten the screws. mitter of EXTA FREE system. In this application the re- mote is used to control roller blinds and lighting. Roller CAUTION: While changing the battery, blinds controller SRP-02 can be controlled centrally or it is suggested to press any of the but- independently (locally), RWL-01 lighting switch receives tons for about 5 seconds before put- switch on / switch off signal and RDP-01 radio dimmer ting it into a latch. Next press trans- allows to regulate luminous density fluently. The ZAMEL company devices mission button several times to check which are characterised its operation. If the transmitter does with this sign can cooperate not work properly repeat the battery with each other. change procedure. COOPERATION AND OPERATING RANGE Symbol ROP-01 ROP-02 ROB-01 SRP-02 SRP-03 RWG-01 RWL-01 ROM-01 ROM-10 RDP-01 RTN-01 RNK-02 180 m 200 m 200 m 200 m 200 m 250 m 180 m 250 m 250 m 180 m 250 m RNK-04 180 m 200 m 200 m 200 m 200 m 250 m 180 m 250 m 250 m 180 m 250 m P-256/8 230 m 250 m 250 m 250 m 250 m 300 m 200 m 300 m 300 m 230 m 300 m P-257/4 (2) 180 m 200 m 200 m 200 m 200 m 250 m 180 m 250 m 250 m 180 m 250 m RNM-10 230 m 250 m 250 m 250 m 250 m 300 m 200 m 300 m 300 m 230 m 300 m RNP-01 160 m 180 m 180 m 180 m 180 m 200 m 160 m 200 m 200 m 160 m 200 m RNP-02 160 m 180 m 180 m 180 m 180 m 200 m 160 m 200 m 200 m 160 m 200 m RNL-01 160 m 180 m 180 m lack* lack* 200 m 160 m 200 m 200 m 160 m 200 m RTN-01 200 m 200 m 200 m 200 m 200 m 250 m 200 m 250 m 250 m 200 m 250 m RCR-01 160 m 180 m 180 m lack* lack* 200 m 160 m 200 m 200 m 160 m 200 m RTI-01 160 m 180 m 180 m 180 m 180 m 200 m 160 m 200 m 200 m 160 m 200 m RXM-01 230 m 250 m 250 m 250 m 250 m 300 m 200 m 300 m 300 m 230 m 300 m * - 1-channel transmitters do not cooperate with roller blind controllers. CAUTION: The given range concerns open area - an ideal condition without any natural or artificial obstacles. If there are some obstacles between a transmitter and a receiver, it is advisable to decrease the range according to: wood and plaster: from 5 to 20 %, bricks: from 10 to 40 %, reinforced concrete: from 40 to 80 %, metal: from 90 to 100%, glass: from 10 to 20 %, Over- and underground medium and high electrical power lines, radio and television transmitters, GSM transmitters set close to a device system have also a negative influence on the range. WARRANTY CARD There is 24 months guarantee on the product 1. ZAMEL provides a two-year warranty for its products. 2. The ZAMEL warranty does not cover: a) mechanical defects resulting from transport, loading / unloading or other circumstances b) defects resulting from incorrect installation or operation of ZAMEL products c) defects resulting from any changes made by CUS- TOMERS or third parties, to products sold or equipment necessary for the correct operation of products sold d) defects resulting from force majeure or other aleatory events for which ZAMEL is not liable e) power supply (batteries) to be equipped with a device in the moment of sale (if they appear) 3. All complaints in relation to the warranty must be provided by the CUSTOMER in writing to the retailer after discovering a defect. 4. ZAMEL will review complaints in accordance with existing regulations. 5. The way a complaint is settled, e.g. replacement of the product, repair or refund, is left to the discretion of ZAMEL. 6. Guarantee does not exclude, does not limit, nor does it suspend the rights of the PURCHASER resulting from the discrepancy between the goods and the contract. Salesman stamp and signature, date of sale