PCM-07/U TIME RELAY INSTRUCTION MANUAL Zakad Mechaniki i Elektroniki ZAMEL sp.j. J.W. Dzida, K. odziska ul. Zielona 27, 43-200 Pszczyna, Poland Tel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04 www.zamelcet.com, e-mail: marketing zamel.pl DESCRIPTION TECHNICAL DATA PCM-07/U The multifunctional digital time relay PCM-07/U has a time function in automa- Power supply terminals: A1, A2 tion and control systems. It is equipped Input rated voltage: 24250 V AC, 30300 V DC with 25 independent operating modes Nominal frequency: 50 / 60 Hz released by power supply voltage or an Rated power consumption: 2 W / 14 VA external impulse command on S terminal (coming from L or N line). It has a really Operating mode release terminals: S, S wide time adjustment range from 0,1 sec. Permanent switch on/switch off terminals: IN, IN to 99 h 59 min. 59,9 sec. And it has per- Number of operating modes: 25 manent switch on / switch off functions by Operating modes: manual, automatic means of IN input. The mode change is Time adjustment range t: 0,1 sec 99 h 59 min 59,9 sec possible without waiting for the current cy- cle to be finished. Time adjustment accuracy: 0,1 s LCD display backlight: amber Time measure accuracy: max. 3 s / 24 h with 25 C FEATURES Hold up programme time: 10 years Receiver input (supply) terminals: 11, 12, 14, 21, 22, 24 25 operating modes (external release Output relay parameters: 2 NO/NC 16 A 250 V AC1 4000 VA or from power supply voltage), Number of terminal clamps: 12 double-modular casing with a security 2 cover, Section of connecting cables: 0,2 2,50 mm S input (start) and an additional IN o Ambient temperature range: -20 +60 C control input (permanent switch on / Operating position: freely switch off), Mounting: rail TH 35 (PN-EN 60715) time measure accuracy, Protection degree: IP20 (PN-EN 60529) wide time adjustment range, permanent switch on or switch off Protection level: II function, Overvoltage category: II voltage relay output two change over Pollution degree: 2 contacts of max 16 A capacity, Dimensions: double-modular (35 mm) 90x35x66 mm LCD display backlight, Weight: 0,130 kg double-modular casing, TH-35 DIN rail installation. Reference standards: PN-EN 60730-1 PN-EN 60730-2-7 PN-EN 61000-4-2,3,4,5,6,11 The device is designed for single-phase installation and must be installed in accor- APPEARANCE dance with standards valid in a particular country. The device should be connected Operating mode release CAUTION terminals (S, S) according to the details inc- Power supply terminals Permanent luded in this operating manual. Installation, (A1, A2) switch on/switch off connection and control should be carried terminals (IN, IN) out by a qualified electrician staff, who act in accordance with the service manual and Automatic mode the device functions. Disassembling of the Manual mode device is equal with a loss of guarantee and can cause electric shock. Before in- stallation make sure the connection cables LCD display Relay mode are not under voltage. The cruciform head Information field screwdriver 3,5 mm should be used to in- stal the device. Improper transport, storage, Operating mode and use of the device influence its wrong number or time Control push buttons functioning. adjustment number It is not advisable to instal the device in the following cases: if any device part is missing or the device is damaged or deformed. In case of improper functioning of the device contact the producer. The symbol means selective collecting of electrical and electronical equipment. It is forbidden to put Relays output (supply) terminals the used equipment together (12, 11, 14, 24, 21, 22) with other waste VER. 002 01.09.2009DESCRIPTION Displayed elements and messages description - relay mode - t1 and t2 time adjustment - switch on/switch off - automatic mode - operating mode adjustment - manual mode - backlight level adjustment - external input S - permanent switch on / switch off input - external input IN - waiting for releasing signal - backlight - operating mode end Push button description main window automatic mode entry main window manual mode entry or relay mode change if the clock is already in the manual mode main window main menu entry different windows - submenu entry or adjusted value confirmation menu windows/options change or decreasing/increasing the adjusted value MAIN MENU Choose OK to enter menu use cursor to choose options. Function Description OPERATING MODE ADJUSTMENT T1 TIME ADJUSTMENT T2 TIME ADJUSTMENT EXTERNAL INPUT ADJUSTMENT BACKLIGHT LEVEL ADJUSTMENT T1 AND T2 TIME ADJUSTMENT - time preview and adjustment press OK to enter adjusted time preview window, press OK to enter There is an escape possibility from HOUR - use cursor to choose the required number of hours adjustment range from 0 to 99 press OK to confirm MINUTE - use cursor to choose the required number of minutes adjustment range from 0 to 59 press OK to confirm every submenu window one level higher in every moment of program- SECOND - use cursor to choose the required number of seconds adjustment range from 0 to 59 press OK to confirm DECIMAL POINT OF A SECOND - use cursor to choose the required value adjustment range from 0 to 90 press OK to confirm ming by pressing or without sav- ing the adjusments. To confirm all the adjustments press OK confirming the command allows to enter the time adjustment window. The system is equipped with protection against 0h0m0s0ss - 0,1 sec is the minimum time. time adjustment in menu - similarly to menu. EXTERNAL INPUT ADJUSTMENT - system mode adjustment suitable for the moment of releasing external input IN the system operates in this mode as long as there is a releasing signal on external input IN press OK to enter use cursors to choose a suitable mode for the external input, where: - external input function is switched off - manual mode with a relay constantly switched off - manual mode with a relay constantly switched on Use cursors to change options press Ok button to confirm choices. After the signal in releasing input IN disappears, the previous operating mode (time measure) will be finished. There is an escape possibility from every submenu window one level high- er in every moment of programming by pressing or without saving the adjusments. BACKLIGHT LEVEL ADJUSTMENT - backlight level adjustment press OK to enter - the backlight switches on after pressing any of the buttons, and it will be switched off automatically after 20 seconds from the last press - the backlight will be switched on as long as the system is connected to power supply voltage - the backlight will be switched off. Use cursors to change options press OK to confirm your choices. There is an escape possibility from every submenu window one level higher in every moment of programming by pressing or without saving the adjusments.