Data Sheet BCM53134P Multiport Ultra Low-Power Gigabit Ethernet Switch General Description Features Six 10/100/1000 media access controllers The Broadcom BCM53134P is an ultra low-power, highly Four-port 10/100/1000 transceivers for TX integrated, cost-effective smart-managed Gigabit switch. One RGMII interface for an IMP for connection to a The switch design is based on the field-proven, industry- CPU/management entity without PHY leading ROBO architecture. This device combines all the One SGMII interface supports 1G/2.5 Gb/s (2.5 Gb/s is functions of a high-speed switch system including packet for 2500BASE-X only) buffers, PHY transceivers, media access controllers Supports 2500BASE-X,1000BASE-X, and 100BASE- (MACs), address management, port-based rate control, and FX a nonblocking switch fabric into a single 28 nm CMOS IEEE 802.1p, MAC Port, TOS, and DiffServ QoS for six device. Designed to be fully compliant with the IEEE 802.3 queues, plus two time-sensitive queues and IEEE 802.3x specifications, including the MAC-control Port-based VLAN PAUSE frame, the BCM53134P provides compatibility with IEEE 802.1Q-based VLAN with 4K entries all industry-standard Ethernet, Fast Ethernet, and Gigabit MAC-based trunking with automatic link failover Ethernet (GbE) devices. Port-based rate control The BCM53134P has a rich feature set suitable for not only Port mirroring (Ingress/Egress) standard GbE connectivity for broadband home gateways, Supports IPv4 and IPv6 desktop, and laptop PCs, but also for next-generation Priority modification on egress gaming consoles, set-top boxes, networked DVD players, BroadSync HD for IEEE 802.1AS support and home theater receivers. It is also specifically designed Timestamp tagging at MAC interface for next generation SOHO/SMB routers and gateways. Time-aware egress scheduler The BCM53134P contains four full-duplex 10/100/ DOS attack prevention 1000BASE-T Ethernet transceivers. In addition, the IGMP Snooping, MLD snooping support BCM53134P has two PHY-less interfaces for the CPU or a Spanning tree support (multiple spanning treesup to router chip, providing flexible 10/100/1000 Mb/s eight) connectivity. One RGMII interface can be connected to a Embedded CPU (8051) processor for cable diagnostics CPU entity and configured as an IMP (In-Band CableChecker with unmanaged mode support Management port). Double tagging/QinQ IEEE 802.az Energy Efficient Ethernet (EEE) support The second interface port is available in an SGMII interface IEEE 802.3x programmable per-port flow control and supporting rates of up to 2.5 Gb/s (2.5 Gb/s is for backpressure, with IEEE 802.1X support for secure 2500BASE-X only) that can be connected to optical user authentication modules or any other device with an SGMII interface.The EEPROM, MDC/MDIO, and SPI Interface. BCM53134P provides 70+ on-chip MIB counters to collect Serial Flash Interface for accessing embedded CPU receive and transmit statistics for each port. (8051) 4K entry MAC address table with automatic learning and aging 128 KB packet buffer (1 KB = 1024 bytes) 128 multicast group support Broadcom Confidential 53134P-DS105 November 15, 2018BCM53134P Data Sheet Multiport Ultra Low-Power Gigabit Ethernet Switch RGMII with option of 3.3V/2.5V or 1.8V/1.5V Features (Continued) JTAG support Jumbo frame support up to 9720 bytes 212-pin FBGA package 1.0V for core and 3.3V for I/O Figure 1: Functional Block Diagram BCM53134P TDP/N 0 3:0 10/100/1000 ContentAware GMAC (Port 0) GPHY Compact Field Processor TDP/N 1 3:0 10/100/1000 GMAC (Port 1) GPHY Registers 10/100/1000 TDP/N 2 3:0 GMAC GPHY (Port 2) Packet Buffer MMU TDP/N 3 3:0 10/100/1000 GMAC (Port 3) GPHY Address Management SGMII or WAN RGMII GMAC LED Interface LED (Port 5) 8051 Micro Flash Controller Memory IMP RGMII or SGMII GMAC (Port 8) EEPROM/SPI EEPROM/ CPU Interface Note: WAN RGMII and IMP RGMII are either or and multiple by strap pin LED6 SGMII P8 SE. Broadcom Confidential 53134P-DS105 November 15, 2018