FT233HP/FT232HP Datasheet Version 1.0 Document No.: FT 001484 Clearance No.: FTDI 558 Future Technology Devices International Ltd FT233HP/FT232HP (High Speed USB Bridge with Type-C/PD3.0 Controller) Supports a proprietary half duplex FT1248 interface with The FT233HP/FT232HP is a Hi-Speed USB a configurable width, bi-directional data bus (1, 2, 4 or 8 device with Type-C/PD 3.0 controller IC that bits wide). fully supports the latest USB Type-C and Power CPU-style FIFO interface mode simplifies CPU interface Delivery (PD) standards enabling support for design. power negotiation with the ability to sink or Fast serial interface option. source current to a USB host device. The USB FTDIs royalty-free Virtual Com Port (VCP) and Direct bridge function delivers 1 independent channel (D2XX) drivers eliminate the requirement for USB driver compatible with the FT232H Single Hi-speed development in most cases. Adjustable receive buffer timeout. USB to multipurpose UART/FIFO solution. The Option for transmit and receive LED drive signals. FT233HP/FT232HP has the following advanced Bit-bang Mode interface option with RD and WR features: strobes Highly integrated design includes 5V to 3.3/+1.8V LDO Supports PD Specification 3.0. regulator for VCORE, integrated POR function 2 USB PD 3.0 Port Support. Port 1 supports Dual Asynchronous serial UART interface option with full Role Swap Function while Port 2 supports sink hardware handshaking and modem interface signals. mode with charging function through to Port 1 Fully assisted hardware or X-On / X-Off software (FT233HPQ and FT233HPL only). handshaking. Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and UART Interface supports 7/8 bit data, 1/2 stop bits, and more PDOs as sink or source. Odd/Even/Mark/Space/No Parity. Type-C/PD Physical Layer Protocol. Auto-transmit enable control for RS485 serial applications PD policy engine using 32-bit RISC controller with using the TXDEN pin. 8kB data RAM and 48kB code ROM. Operational mode configuration and USB Description PD mode configuration through external EEPROM. strings configurable in external EEPROM over the USB Options to use external MCU controlling PD policy interface. through I2C interface. Configurable I/O drives strength (4, 8, 12 or 16mA) and Up to 8 Configurable PD GPIO pins support. slew rate. External MCU support through I2C bus. Low operating and USB suspend current. External EEPROM support for USB device UHCI/OHCI/EHCI host controller compatible. configuration and PD profile. USB Bulk data transfer mode (512 byte packets in Hi- Single channel USB to serial / parallel ports with Speed mode). a variety of configurations. +1.2V (chip core) and +3.3V I/O interfacing (+5V Entire USB protocol handled on the chip. No USB Tolerant). specific firmware programming required. Extended -40C to 85C industrial operating temperature USB 2.0 Hi-Speed (480Mbits/Second) and Full range. Speed (12Mbits/Second) compatible. 3 IC Package with RoHS compliant Support: Multi-Protocol Synchronous Serial Engine FT233HPQ:Compact 64-pin Lead Free QFN package (MPSSE) to simplify synchronous serial protocol supports 2 PD 3.0 port 2 (USB to JTAG, I C (MASTER), SPI (MASTER) or FT233HPL:Compact 64-pin Lead Free LQFP package bit-bang) design. supports 2 PD 3.0 port UART transfer data rate up to 12Mbaud. (RS232 FT232HPQ:Compact 56-pin Lead Free QFN package Data Rate limited by external level shifter). supports 1 PD 3.0 Port USB to asynchronous 245 FIFO mode for transfer Configurable ACBUS I/O pins. data rate up to 8 Mbyte/Sec. USB to synchronous 245 parallel FIFO mode for transfers up to 40 Mbytes/Sec Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow G41 1HH United Kingdom. Scotland Registered Company Number: SC136640 Copyright Future Technology Devices International Limited 1 FT233HP/FT232HP Datasheet Version 1.0 Document No.: FT 001484 Clearance No.: FTDI 558 1 Typical Applications USB Type-C/USB 3.0 Power Delivery Support USB Instrumentation High-power application via USB PD and/or USB Industrial Control Type-C port USB EPOS Control Get power from USB device functions, e.g. USB MP3 Player Interface portable USB host needs charging when USB is connected. USB FLASH Card Reader / Writers Single chip USB to UART (RS232, RS422 or Set Top Box - USB interface RS485) USB Digital Camera Interface USB to FIFO USB Bar Code Readers USB to FT1248 USB to JTAG USB to SPI 2 USB to I C USB to Bit-Bang USB to Fast Serial Interface USB to CPU target interface (as memory) 1.1 Driver Support The FT233HP/FT232HP requires USB device drivers (listed below), available free from