FT601Q-B-T FTDI

FT600Q-FT601Q IC Datasheet Version 1.05 Document No.: FT 001118 Clearance No.: FTDI 424 Future Technology Devices International Ltd. FT600Q-FT601Q IC Datasheet (USB 3.0 to FIFO Bridge) The FT600/FT601 is a USB 3.0 to FIFO interface Supports Remote Wakeup capability. bridge chip with the following advanced features: Supports multi voltage I/O: 1.8V, 2.5V and 3.3V. Supports USB 3.0 Super Speed (5Gbps)/USB Configurable GPIO support. 2.0 High Speed (480Mbps)/USB 2.0 Full Speed (12Mbps) transfer. Internal LDO 1.0V regulator. Supported USB Transfer Type: Integrated power-on-reset circuit. Control/Bulk/Interrupt User programmable USB descriptors. Up to 8 configurable endpoints (PIPEs). Supports Battery Charging spec. BC1.2 battery charging Supports 2 parallel slave FIFO bus protocols detection. 245 and FIFO mode, FT601 with 32 bit Available as FT600-16bit/FT601-32bit FIFO interface. parallel interface has a data bursting rate up to 400MB/s. Industrial operating temperature range: -40 to 85 C. Supports 4 IN channels and 4 OUT channels Available in compact Pb-free QFN-76(32bit) and QFN- on FIFO bus connectivity. 56(16bit) packages (both RoHS compliant). Built-in 16kB FIFO data buffer RAM. Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow G41 1HH United Kingdom. Scotland Registered Company Number: SC136640 Copyright Future Technology Devices International Limited 1 FT600Q-FT601Q IC Datasheet Version 1.05 Document No.: FT 001118 Clearance No.: FTDI 424 1 Typical Applications Upgrading Legacy Peripherals to USB USB 3.0 Digital Video Camera Interface Utilising USB to add system modularity USB 3.0 Digital Camera Interfacing PLD/FPGA based designs to USB 3.0 USB 3.0 Interface for Printer/Scanner USB 3.0 data acquisition Medical/Industrial imaging devices USB 3.0 Instrumentation 1.1 Driver Support Royalty free D3XX Direct Drivers (USB Drivers + DLL S/W Interface) Windows 10 Windows 8 Windows 7 Mac OS-X (available in 2017) Linux The drivers listed above are all available to download for free from the FTDI website (www.ftdichip.com). For driver installation, please refer to