Subminiature Coaxial Switch 1.35mm High, DC to 11GHz
MS-156C Series
Overview
Developed for inspection of high frequency
circuits used in portable terminals.Verification of
the circuit performance is accomplished by
simply inserting the external plug in the board
mounted receptacle.This action re-directs the
circuit from normal condition to the plug side.
Removing the plug restores circuit to its normal
condition.
Features
Space-saving design
Low profile: 1.35mm protrusion above the board.
1. Low insertion loss
Lightweight: 0.014g. total weight.
0.15 dB MAX (DC to 2.5GHz)
0.2 dB MAX (2.5GHz to 6GHz)
0.4 dB MAX (6GHz to 11GHz)
(NORMALLY CLOSED)
2. Space-saving design
2.3mm x 2.3mm occupied board space.
3. Low profile
MS-156C Series
1.35mm high above the board.
4. Lightweight
Comparison with our conventional type
0.014g. total weight
Conventional type MS-156C3
5. Durability
Footprint
100 mating/unmating cycles, with corresponding
2.7
plug.
2.3
6. Performs over a wide frequency range
Applicable frequencies range over a wide band,
from DC to 11GHz.
7. Board placement with automatic
27% saving of space
equipment
Packaged on tape-and-reel.
Height
8. Halogen Free, Beryllium free
Chlorine, and bromine are not used in the
receptacles.
*Definition according to IEC 61249-2-21.
Br 900 ppm max., Cl 900 ppm max., and Br + Cl
15% lower profile
1500 ppm max.
Weight
0.025g 0.014g
44% lighter weight
In cases where the application will demand a high level of reliability, such as automotive,
1
2015.12e
please contact a company representative for further information.
Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
2.7
1.6
1.35
2.3MS-156C SeriesSubminiature Coaxial Switch 1.35mm High, DC to 11GHz
Product Specifications
Unmated Mated with MS-156-HRMJ-3 plug
Operating
-40 to +85 -40 to +85
temperature range
Rated power 2W 2W
DC to 11GHz DC to 8GHz
Frequency range
1.2 max. (DC to 2.5GHz)
1.4 max. (DC to 3.0GHz)
V.S.W.R. 1.3 max. (2.5GHz to 6.0GHz)
1.8 max. (3.0GHz to 8.0GHz)
1.5 max. (6.0GHz to 11.0GHz)
0.15dB max. (DC to 2.5GHz) 0.5dB max. (DC to 3.0GHz)
Insertion loss 0.2dB max. (2.5GHz to 6.0GHz) 0.8dB max. (3.0GHz to 6.0GHz)
0.4dB max. (6.0GHz to 11.0GHz) 0.9dB max. (6.0GHz to 8.0GHz)
20dB min.(DC to 3.0GHz)
Isolation 15dB min.(3.0GHz to 6.0GHz)
12dB min.(6.0GHz to 11.0GHz)
Item Specification Conditions
1. Contact resistance 100m max. 100mA max.
2. Insulation resistance 1000M min. 100V DC
3. Withstanding voltage No flashover or insulation breakdown 100V AC / 1 minute
4. Vibration Frequency: 10 to 55Hz, single amplitude of
No electrical discontinuity of 1s or
0.75mm, 2 hours in each of the 3 axis.
2
Acceleration of 490m/s , 6ms duration, sine half-wave
more
5. Shock
waveform, 3 cycles in each of the 3 axis, 18 times in total.
Temperature: -55 / +5 to +35 / +85 /+5 to +35
Contact resistance : 100m max.
6. Temperature cycle Time : 30 / 5 max. / 30 / 5 max. (Minutes)
Insulation resistance : 10M min.
50 cycles
Contact resistance : 100m max.
7. High temperature exposure 96 hours at 85
Insulation resistance : 10M min.
Contact resistance : 100m max.
8. Low temperature exposure 96 hours at -55
Insulation resistance : 10M min.
Contact resistance : 100m max.
9. Humidity 96 hours at 402, and humidity of 90 to 95%
Insulation resistance : 10M min.
10. Durability (mating/un-mating,
Contact resistance : 100m max. 100 cycles
with corresponding plug)
Note 1: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and
specifications for a specific part number shown.
Materials / Finish
Part Material Finish Remarks
Shell Phosphor bronze Gold plated ---------------------------
Insulator 6T Nylon --------------------------- UL94HB
Common terminal Cu-Ni-Si alloy Selective gold plated ---------------------------
Antenna terminal Phosphor bronze Selective gold plated ---------------------------
2
Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.