Please note that Cypress is an Infineon Technologies Company. The document following this cover page is marked as Cypress document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio. Continuity of document content The fact that Infineon offers the following product as part of the Infineon product portfolio does not lead to any changes to this document. Future revisions will occur when appropriate, and any changes will be set out on the document history page. Continuity of ordering part numbers Infineon continues to support existing part numbers. Please continue to use the ordering part numbers listed in the datasheet for ordering. www.infineon.com CYBLE-012011-00 EZ-BLE Creator Module CYBLE-012011-00, EZ-BLE Creator Module Functional Capabilities General Description Up to 22 capacitive sensors for buttons or sliders with The CYBLE-012011-00 is a Bluetooth Low Energy wireless best-in-class signal-to-noise ratio (SNR) and liquid tolerance module solution. The CYBLE-012011-00 is a turnkey solution and includes onboard crystal oscillators, trace antenna, passive 12-bit, 1-Msps SAR ADC with internal reference, components, and the Cypress PSoC 4 Bluetooth LE. Refer to the sample-and-hold (S/H), and channel sequencer PSoC 4 Bluetooth LE datasheet for additional details on the 2 Two serial communication blocks (SCBs) supporting I C capabilities of the PSoC 4 Bluetooth LE device used on this (master/slave), SPI (master/slave), or UART module. The CYBLE-012011-00 supports a number of peripheral Four dedicated 16-bit timer, counter, or PWM blocks functions (ADC, timers, counters, PWM) and serial (TCPWMs) 2 communication protocols (I C, UART, SPI) through its LCD drive supported on all GPIOs (common or segment) programmable architecture. The CYBLE-012011-00 includes a royalty-free Bluetooth LE stack compatible with Bluetooth 5.1 Programmable low voltage detect (LVD) from 1.8 V to 4.5 V and provides up to 23 GPIOs in a 14.52 19.20 2.00 mm 2 I S master interface package. The CYBLE-012011-00 is fully certified and qualified and is an Bluetooth Low Energy protocol stack supporting generic ideal fit for cost sensitive applications. access profile (GAP) Central, Peripheral, Observer, or Broadcaster roles Module Description Switches between Central and Peripheral roles on-the-go Module size: 14.52 mm 19.20 mm 2.00 mm (with shield) Standard Bluetooth Low Energy profiles and services for Castellated solder pad connections for ease-of-use interoperability 128-KB flash memory, 16-KB SRAM memory Custom profile and service for specific use cases Up to 23 GPIOs configurable as open drain high/low, Benefits pull-up/pull-down, HI-Z analog, HI-Z digital, or strong output The CYBLE-012011-00 module is provided as a turnkey solution, Bluetooth 5.1 qualified single-mode module including all necessary hardware required to use Bluetooth LE QDID: U048529 communication standards. Declaration ID: 141257 Proven hardware design ready to use Certified to FCC, ISED, MIC, KC, and CE regulations Cost optimized for applications without space constraint, Industrial temperature range: 40 C to +85 C Footprint 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit Reprogrammable architecture multiply, operating at up to 48 MHz Fully certified module eliminates the time needed for design, Watchdog timer with dedicated internal low-speed oscillator development and certification processes (ILO) Bluetooth SIG qualified with QDID and Declaration ID Two-pin SWD for programming Flexible communication protocol support Power Consumption PSoC Creator provides an easy-to-use integrated design TX output power: 18 dbm to +3 dbm environment (IDE) to configure, develop, program, and test a Bluetooth LE application Received signal strength indicator (RSSI) with 1-dB resolution TX current consumption of 15.6 mA (radio only, 0 dbm) RX current consumption of 16.4 mA (radio only) Low power mode support Deep Sleep: 1.3 A with watch crystal oscillator (WCO) on Hibernate: 150 nA with SRAM retention Stop: 60 nA with GPIO (P2.2) or XRES wakeup Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600 Document Number: 002-02521 Rev. *I Revised December 23, 2020