Please note that Cypress is an Infineon Technologies Company. The document following this cover page is marked as Cypress document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio. Continuity of document content The fact that Infineon offers the following product as part of the Infineon product portfolio does not lead to any changes to this document. Future revisions will occur when appropriate, and any changes will be set out on the document history page. Continuity of ordering part numbers Infineon continues to support existing part numbers. Please continue to use the ordering part numbers listed in the datasheet for ordering. www.infineon.comCYBLE-014008-00 EZ-BLE Creator Module EZ-BLE Creator Module RX current consumption of 16.4 mA (radio only) General Description Low power mode support The Cypress CYBLE-014008-00 is a fully certified and qualified Deep Sleep: 1.3 A with watch crystal oscillator (WCO) on module supporting Bluetooth Low Energy wireless communi- Hibernate: 150 nA with SRAM retention cation. The CYBLE-014008-00 is a turnkey solution and includes Stop: 60 nA with GPIO (P2.2) or XRES wakeup onboard crystal oscillators, trace antenna, passive components, and the Cypress PSoC 4 Bluetooth LE. Refer to the PSoC 4 Programmable Analog BLE datasheet for additional details on the capabilities of the Four opamps with reconfigurable high-drive external and PSoC 4 Bluetooth LE device used on this module. high-bandwidth internal drive, comparator modes, and ADC The EZ-BLE Creator module is a scalable and reconfigurable input buffering capability can operate in Deep-Sleep mode platform architecture. It combines programmable and 12-bit, 1-Msps SAR ADC with differential and single-ended reconfigurable analog and digital blocks with flexible automatic modes channel sequencer with signal averaging routing. The CYBLE-014008-00 also includes digital programmable logic, high-performance analog-to-digital Two current DACs (IDACs) for general-purpose or capacitive conversion (ADC), opamps with comparator mode, and standard sensing applications on any pin communication and timing peripherals. One low-power comparator that operate in Deep-Sleep mode The CYBLE-014008-00 includes a royalty-free Bluetooth LE stack compatible with Bluetooth 5.1 and provides up to 25 GPIOs Programmable Digital in a small 11 11 1.80 mm package. Four programmable logic blocks called universal digital blocks, The CYBLE-014008-00 is a complete solution and an ideal fit for (UDBs), each with eight macrocells and datapath applications seeking a highly integrated Bluetooth LE wireless Cypress-provided peripheral Component library, user-defined solution. state machines, and Verilog input Module Description Capacitive Sensing Module size: 11.0 mm 11.0 mm 1.80 mm (with shield) Cypress CapSense Sigma-Delta (CSD) provides best-in-class SNR (> 5:1) and liquid tolerance 128-KB flash memory, 16-KB SRAM memory Cypress-supplied software component makes Up to 25 GPIOs configurable as open drain high/low, capacitive-sensing design easy pull-up/pull-down, HI-Z analog, HI-Z digital, or strong output Automatic hardware-tuning algorithm (SmartSense) Bluetooth 5.1 qualified single-mode module Segment LCD Drive QDID: 141255 LCD drive supported on all GPIOs (common or segment) Declaration ID: U048554 Operates in Deep-Sleep mode with four bits per pin memory Certified to FCC, CE, MIC, KC, and ISED regulations Serial Communication Industrial temperature range: 40 C to +85 C Two independent runtime reconfigurable serial communication 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit 2 blocks (SCBs) with I C, SPI, or UART functionality multiply, operating at up to 48 MHz Timing and Pulse-Width Modulation Watchdog timer with dedicated internal low-speed oscillator (ILO) Four 16-bit timer, counter, pulse-width modulator (TCPWM) blocks Two-pin SWD for programming Center-aligned, Edge, and Pseudo-random modes Power Consumption Comparator-based triggering of Kill signals for motor drive and other high-reliability digital logic applications TX output power: 18 dbm to +3 dbm Up to 25 Programmable GPIOs Received signal strength indicator (RSSI) with 1-dB resolution Any GPIO pin can be CapSense, LCD, analog, or digital TX current consumption of 15.6 mA (radio only, 0 dbm) Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600 Document Number: 002-00023 Rev. *O Revised December 23, 2020