Please note that Cypress is an Infineon Technologies Company. The document following this cover page is marked as Cypress document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio. Continuity of document content The fact that Infineon offers the following product as part of the Infineon product portfolio does not lead to any changes to this document. Future revisions will occur when appropriate, and any changes will be set out on the document history page. Continuity of ordering part numbers Infineon continues to support existing part numbers. Please continue to use the ordering part numbers listed in the datasheet for ordering. www.infineon.comCYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 EZ-BLE Creator XR Module CYBLE-212006-01, CYBLE-202007-01, CYBLE-202013-11 EZ-BLE Creator XR Module TX current consumption General Description Bluetooth LE silicon: 15.6 mA (radio only, 0 dbm) The CYBLE-2X20XX-X1 is a Bluetooth Low Energy wireless RFX2401C: 27 mA (PA/LNA only, +7.5 dBm) module solution. The CYBLE-2X20XX-X1 is a turnkey solution RX current consumption and includes onboard crystal oscillators, passive components, Bluetooth LE silicon: 16.4 mA (radio only, 0 dbm) and the Cypress PSoC 4 Bluetooth LE. Refer to the PSoC 4 Bluetooth LE datasheet for additional details on the capabilities RFX2401C: 8.0 mA (PA/LNA only) of the PSoC 4 Bluetooth LE device used on this module. Cypress CYBL1XX7X silicon low power mode support The CYBLE-2X20XX-X1 supports a number of peripheral Deep Sleep: 1.3 A with watch crystal oscillator (WCO) on functions (ADC, timers, counters, PWM) and serial Hibernate: 150 nA with SRAM retention 2 communication protocols (I C, UART, SPI) through its Stop: 60 nA with XRES wakeup programmable architecture. The CYBLE-2X20XX-X1 includes a royalty-free Bluetooth LE stack compatible with Bluetooth 5.1 Functional Capabilities and provides up to 19 GPIOs in a 15.0 23.0 2.0 mm package. Up to 18 capacitive sensors for buttons or sliders The CYBLE-2X20XX-X1 is offered in two certified versions (CYBLE-212006-01 and CYBLE-202007-01), as well as an 12-bit, 1-Msps SAR ADC with internal reference, uncertified version (CYBLE-202013-11). The CYBLE-212006-01 sample-and-hold (S/H), and channel sequencer includes an integrated trace antenna. The CYBLE-202007-01 2 Two serial communication blocks (SCBs) supporting I C supports an external antenna via a u-FL connector. The (master/slave), SPI (master/slave), or UART CYBLE-202013-11 supports an external antenna through a RF solder pad output. The CYBLE-202013-11 does not include a RF Four dedicated 16-bit timer, counter, or PWM blocks shield and is not regulatory certified. (TCPWMs) Module Description LCD drive supported on all GPIOs (common or segment) Module size: 15.00 mm 23.00 mm 2.00 mm Programmable low voltage detect (LVD) from 1.8 V to 3.6 V 2 Extended Range: I S master interface 1,2 Up to 400 meters bi-directional communication Bluetooth LE protocol stack supporting generic access profile 1 Up to 450 meters in beacon only mode (GAP) Central, Peripheral, Observer, or Broadcaster roles Bluetooth 5.1 qualified single-mode module Switches between Central and Peripheral roles on-the-go QDID: 167529 Standard Bluetooth LE profiles and services for interoperability Declaration ID: D054766 Custom profile and service for specific use cases Footprint compatible options for integrated antenna or antenna-less design options Benefits Certified to FCC, ISED, MIC, KC, and CE regulations (CYBLE-212006-01 and CYBLE-202007-01 only) CYBLE-2X20XX-X1 is provided as a turnkey solution, including all necessary hardware required to use Bluetooth LE communi- Castelated solder pad connections for ease-of-use cation standards. 256-KB flash memory, 32-KB SRAM memory Proven hardware design ready to use Up to 19 GPIOs Cost optimized for applications without space constraint Industrial temperature range: 40 C to +85 C Reprogrammable architecture 32-bit processor (0.9 DMIPS/MHz) operating up to 48 MHz Fully certified module eliminates the time needed for design, development and certification Watchdog timer with dedicated internal low-speed oscillator Bluetooth SIG qualified with QDID and Declaration ID Power Consumption Flexible communication protocol support Maximum TX output power: +7.5 dbm PSoC Creator provides an easy-to-use integrated design RX Receive Sensitivity: 93 dbm environment (IDE) to configure, develop, program, and test a Received signal strength indicator (RSSI) with 1-dB resolution Bluetooth LE application Notes 1. Connection range tested module-to-module in full line-of-sight environment, free of obstacles or interference sources with output power of +7.5 dBm. 2. Specified as EZ-BLE XR module to module range. Mobile phone connection range will decrease based on the PA/LNA performance of the mobile phone used. Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600 Document Number: 002-15631 Rev. *I Revised May 10, 2021