Please note that Cypress is an Infineon Technologies Company. The document following this cover page is marked as Cypress document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio. Continuity of document content The fact that Infineon offers the following product as part of the Infineon product portfolio does not lead to any changes to this document. Future revisions will occur when appropriate, and any changes will be set out on the document history page. Continuity of ordering part numbers Infineon continues to support existing part numbers. Please continue to use the ordering part numbers listed in the datasheet for ordering. www.infineon.comCYBLE-212020-01 EZ-BLE Creator Module EZ-BLE Creator Module RX current consumption of 16.4 mA (radio only) General Description Low power mode support The CYBLE-212020-01 is a fully certified and qualified module Deep Sleep: 1.3 A with watch crystal oscillator (WCO) on supporting Bluetooth Low Energy 5.1 wireless communication. Hibernate: 150 nA with SRAM retention The CYBLE-212020-01 is a turnkey solution and includes Stop: 60 nA with GPIO (P2.2) or XRES wakeup onboard crystal oscillators, trace antenna, passive components, and the Cypress PSoC 4 Bluetooth LE. Refer to the PSoC 4 Functional Capabilities Bluetooth LE datasheet for additional details on the capabilities of the PSoC 4 Bluetooth LE device used on this module. Up to 22 capacitive sensors for buttons or sliders with best-in-class signal-to-noise ration (SNR) and liquid tolerance The CYBLE-212020-01 supports a number of peripheral functions (ADC, timers, counters, PWM) and serial 12-bit, 1-Msps SAR ADC with internal reference, 2 communication protocols (I C, UART, SPI) through its sample-and-hold (S/H), and channel sequencer programmable architecture. The CYBLE-212020-01 includes a 2 royalty-free Bluetooth LE stack compatible with Bluetooth 5.1 Two serial communication blocks (SCBs) supporting I C and provides up to 23 GPIOs in a 14.52 19.20 2.00 mm (master/slave), SPI (master/slave), or UART package. Four dedicated 16-bit timer, counter, or PWM (TCPWM) blocks The CYBLE-212020-01 is drop-in compatible with the LCD drive supported on all GPIOs (common or segment) CYBLE-012011-00 (128KB BT 5.1) and CYBLE-212019-00 (256KB BT 4.1) EZ-BLE Creator Modules. Programmable low-voltage detect (LVD) from 1.8 V to 4.5 V The CYBLE-212020-01 is a complete solution targeted at appli- 2 I S master interface cations requiring cost-optimized Bluetooth LE wireless connec- tivity. Bluetooth LE protocol stack supporting generic access profile (GAP) Central, Peripheral, Observer, or Broadcaster roles Module Description Switches between Central and Peripheral roles on-the-go Module size: 14.52 mm 19.20 mm 2.00 mm (with shield) Standard Bluetooth LE profiles and services for interoperability Castelated solder pad connections for ease-of-use Custom profile and service for specific use cases 256-KB flash memory, 32-KB SRAM memory Benefits Up to 23 GPIOs configurable as open drain high/low, pull-up/pull-down, HI-Z analog, HI-Z digital, or strong output The CYBLE-212020-01 module is provided as a turnkey Bluetooth 5.1 single-mode module solution, including all necessary hardware required to use Bluetooth LE communication standards. QDID: 167531 Declaration ID: D054767 Proven hardware design that is ready for use Certified to FCC, ISED, MIC, KC, and CE regulations Cost-optimized for applications without space constraint Industrial temperature range: 40 C to +85 C Reprogrammable architecture 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit Fully certified module eliminates the time needed for design, multiply, operating at up to 48 MHz development and certification processes Watchdog timer with dedicated internal low-speed oscillator Bluetooth SIG qualified with QDID and Declaration ID (ILO) Flexible communication protocol support Two-pin SWD for programming PSoC Creator provides an easy-to-use integrated design Power Consumption environment (IDE) to configure, develop, program, and test a Bluetooth LE application TX output power: 18 dbm to +3 dbm Received signal strength indicator (RSSI) with 1-dB resolution TX current consumption of 15.6 mA (radio only, 0 dbm) Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600 Document Number: 002-12597 Rev. *H Revised May 7, 2021