Please note that Cypress is an Infineon Technologies Company. The document following this cover page is marked as Cypress document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio. Continuity of document content The fact that Infineon offers the following product as part of the Infineon product portfolio does not lead to any changes to this document. Future revisions will occur when appropriate, and any changes will be set out on the document history page. Continuity of ordering part numbers Infineon continues to support existing part numbers. Please continue to use the ordering part numbers listed in the datasheet for ordering. www.infineon.com CYBLE-214015-01 EZ-BLE Creator Module CYBLE-214015-01 EZ-BLE Creator Module General Description The Cypress CYBLE-214015-01 is a fully certified and qualified TX current consumption of 15.6 mA (radio only, 0 dbm) module supporting Bluetooth Low Energy wireless communi- RX current consumption of 16.4 mA (radio only) cation. The CYBLE-214015-01 is a turnkey solution and includes onboard crystal oscillators, trace antenna, passive components, Low power mode support and the Cypress PSoC 4 Bluetooth LE. Refer to the PSoC 4 Deep Sleep: 1.3 A with watch crystal oscillator (WCO) on Bluetooth LE datasheet for additional details on the capabilities Hibernate: 150 nA with SRAM retention of the PSoC 4 Bluetooth LE device used on this module. Stop: 60 nA with XRES wakeup The EZ-BLE Creator module is a scalable and reconfigurable Programmable Analog platform architecture. It combines programmable and reconfigurable analog and digital blocks with flexible automatic Four opamps with reconfigurable high-drive external and routing. The CYBLE-214015-01 also includes digital high-bandwidth internal drive, comparator modes, and ADC programmable logic, high-performance analog-to-digital input buffering capability can operate in Deep-Sleep mode conversion (ADC), opamps with comparator mode, and standard 12-bit, 1-Msps SAR ADC with differential and single-ended communication and timing peripherals. modes channel sequencer with signal averaging The CYBLE-214015-01 includes a royalty-free Bluetooth LE Two current DACs (IDACs) for general-purpose or capacitive stack compatible with Bluetooth 4.2 and provides up to 25 GPIOs sensing applications on any pin in a small 11 11 1.80 mm package. The CYBLE-214015-01 is drop-in compatible with the CYBLE-014008-00 and One low-power comparator that operate in Deep-Sleep mode CYBLE-214009-00 EZ-BLE Modules. Programmable Digital The CYBLE-214015-01 is a complete solution and an ideal fit for Four programmable logic blocks called universal digital blocks, applications seeking a highly integrated Bluetooth LE wireless (UDBs), each with eight macrocells and datapath solution. Cypress-provided peripheral Component library, user-defined Module Description state machines, and Verilog input Module size: 11.0 mm 11.0 mm 1.80 mm (with shield) Capacitive Sensing Drop-in compatible with CYBLE-014008-00 and Cypress CapSense Sigma-Delta (CSD) provides best-in-class CYBLE-214009-00 SNR (> 5:1) and liquid tolerance Cypress-supplied software component makes 256-KB flash memory, 32-KB SRAM memory capacitive-sensing design easy Up to 25 GPIOs configurable as open drain high/low, Automatic hardware-tuning algorithm (SmartSense) pull-up/pull-down, HI-Z analog, HI-Z digial, or strong output Segment LCD Drive Bluetooth 4.2 qualified single-mode module QDID: 79480 LCD drive supported on all GPIOs (common or segment) Declaration ID: D029646 Operates in Deep-Sleep mode with four bits per pin memory Certified to FCC, CE, MIC, KC, and ISED regulations Serial Communication Industrial temperature range: 40 C to +85 C Two independent runtime reconfigurable serial communication 2 blocks (SCBs) with I C, SPI, or UART functionality 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit multiply, operating at up to 48 MHz Timing and Pulse-Width Modulation Watchdog timer with dedicated internal low-speed oscillator Four 16-bit timer, counter, pulse-width modulator (TCPWM) (ILO) blocks Two-pin SWD for programming Center-aligned, Edge, and Pseudo-random modes Comparator-based triggering of Kill signals for motor drive and Power Consumption other high-reliability digital logic applications TX output power: 18 dbm to +3 dbm Up to 25 Programmable GPIOs Received signal strength indicator (RSSI) with 1-dB resolution Any GPIO pin can be CapSense, LCD, analog, or digital Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600 Document Number: 002-15923 Rev. *F Revised December 22, 2020