Please note that Cypress is an Infineon Technologies Company. The document following this cover page is marked as Cypress document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio. Continuity of document content The fact that Infineon offers the following product as part of the Infineon product portfolio does not lead to any changes to this document. Future revisions will occur when appropriate, and any changes will be set out on the document history page. Continuity of ordering part numbers Infineon continues to support existing part numbers. Please continue to use the ordering part numbers listed in the datasheet for ordering. www.infineon.comCYBLE-222014-01 EZ-BLE Creator Module EZ-BLE Creator Module Low power mode support General Description Deep Sleep: 1.3 A with watch crystal oscillator (WCO) on The Cypress CYBLE-222014-01 is a fully certified and qualified Hibernate: 150 nA with SRAM retention module supporting Bluetooth Low Energy 5.1 wireless Stop: 60 nA with XRES wakeup communication. The CYBLE-222014-01 is a turnkey solution and includes onboard crystal oscillators, chip antenna, passive Functional Capabilities components, and Cypress PSoC 4 Bluetooth LE. Refer to the Up to 15 capacitive sensors for buttons or sliders with PSoC 4 Bluetooth LE datasheet for additional details on the best-in-class signal-to-noise ration (SNR) and liquid tolerance capabilities of the Bluetooth LE device used on this module. 12-bit, 1-Msps SAR ADC with internal reference, The CYBLE-222014-01 supports a number of peripheral sample-and-hold (S/H), and channel sequencer functions (ADC, timers, counters, PWM) and serial 2 communication protocols (I C, UART, SPI) through its 2 Two serial communication blocks (SCBs) supporting I C programmable architecture. The CYBLE-222014-01 includes a (master/slave), SPI (master/slave), or UART royalty-free Bluetooth LE stack compatible with Bluetooth 5.1 and provides up to 16 GPIOs in a small 10 10 1.80 mm Four dedicated 16-bit timer, counter, or PWM blocks package. (TCPWMs) The CYBLE-222014-01 is drop-in compatible with the Programmable low-voltage detect (LVD) from 1.8 V to 4.5 V CYBLE-022001-00 (128KB BT 5.1) and CYBLE-222005-00 2 I S master interface (256KB BT 4.1). Bluetooth Low Energy protocol stack supporting generic Module Description access profile (GAP) Central, Peripheral, Observer, or Module size: 10.0 mm 10.0 mm 1.80 mm (with shield) Broadcaster roles 256-KB flash memory, 32-KB SRAM memory Switches between Central and Peripheral roles on-the-go Up to 16 GPIOs configurable as open drain high/low, Standard Bluetooth Low Energy profiles and services for pull-up/pull-down, HI-Z analog, HI-Z digital, or strong output interoperability Bluetooth 5.1 qualified single-mode module Custom profile and service for specific use cases QDID: 167533 Benefits Declaration ID: D054768 Certified to FCC, CE MIC, KC, and ISED regulations The CYBLE-222014-01 module is provided as a turnkey solution, including all necessary hardware required to use Eight-channel direct memory access (DMA) controller Bluetooth LE communication standards. 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit Proven, qualified, and certified hardware design ready to use multiply, operating at up to 48 MHz Small footprint (10 10 mm 1.80 mm), perfect for space Industrial temperature range: 40 C to +85 C constrained applications Watchdog timer with dedicated internal low-speed oscillator Reprogrammable architecture (ILO) Fully certified module eliminates the time needed for design, Two-pin SWD for programming development and certification processes Power Consumption Bluetooth SIG qualified with QDID and Declaration ID TX output power: 18 dbm to +3 dbm Flexible communication protocol support Received signal strength indicator (RSSI) with 1-dB resolution PSoC Creator provides an easy-to-use integrated design environment (IDE) to configure, develop, program, and test a TX current consumption of 15.6 mA (radio only, 0 dbm) Bluetooth LE application RX current consumption of 16.4 mA (radio only) Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600 Document Number: 002-11186 Rev. *I Revised May 7, 2021