Please note that Cypress is an Infineon Technologies Company. The document following this cover page is marked as Cypress document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio. Continuity of document content The fact that Infineon offers the following product as part of the Infineon product portfolio does not lead to any changes to this document. Future revisions will occur when appropriate, and any changes will be set out on the document history page. Continuity of ordering part numbers Infineon continues to support existing part numbers. Please continue to use the ordering part numbers listed in the datasheet for ordering. www.infineon.com CYBLE-224116-01 EZ-BLE Creator XT/XR Module CYBLE-224116-01, EZ-BLE Creator XT/XR Module SE2438T: 20 mA (PA/LNA only, +9.5 dBm) General Description RX current consumption of 16.4 mA (radio only) The Cypress CYBLE-224116-01 is a fully certified and qualified Bluetooth LE silicon: 16.4 mA (radio only) module supporting Bluetooth Low Energy wireless SE2438T: 5.5 mA (PA/LNA only) communication. The CYBLE-224116-01 is a turnkey solution that includes onboard power amplifier (PA), low noise amplifier Low power mode support (LNA), crystal oscillators, chip antenna, passive components, Deep Sleep: 1.3 A with watch crystal oscillator (WCO) on and the Cypress PSoC 4 Bluetooth LE. Refer to the PSoC 4 Hibernate: 150 nA with SRAM retention Bluetooth LE datasheet for additional details on the capabilities Stop: 60 nA with XRES wakeup of the PSoC 4 Bluetooth LE device used on this module. Integrated PA/LNA The EZ-BLE Creator XT/XR module provides extended industrial temperature operation (XT) as well as extended Supports output power up to +9.5 dBm and RX of 95 dBm S communication range (XR). The EZ-BLE XT/XR module is a Programmable Analog scalable and reconfigurable platform architecture, combining programmable and reconfigurable analog and digital blocks with Four opamps with reconfigurable high-drive external and flexible automatic routing. The CYBLE-224116-01 also includes high-bandwidth internal drive, comparator modes, and ADC digital programmable logic, high-performance analog-to-digital input buffering capability can operate in Deep-Sleep mode conversion (ADC), opamps with comparator mode, and standard 12-bit, 1-Msps SAR ADC with differential and single-ended communication and timing peripherals. The CYBLE-224116-01 modes channel sequencer with signal averaging includes a royalty-free Bluetooth LE stack compatible with Bluetooth 5.1. Two current DACs (IDACs) for general-purpose or capacitive sensing applications on any pin Module Description One low-power comparator that operate in Deep-Sleep mode Module size: 9.5 mm 15.4 mm 1.80 mm (with shield) Programmable Digital Drop-in compatible with CYBLE-224110-00 (XT/XR 4.1) Four programmable logic blocks called universal digital blocks, Extended Range: (UDBs), each with eight macrocells and datapath 1, 2 Up to 400 meters bidirectional communication Cypress-provided peripheral Component library, user-defined 1 Up to 450 meters in beacon only mode state machines, and Verilog input Extended industrial temperature range: 40 C to +105 C Capacitive Sensing Up to 25 GPIOs Cypress CapSense Sigma-Delta (CSD) provides best-in-class SNR (> 5:1) and liquid tolerance 256-KB flash memory, 32-KB SRAM memory Bluetooth 5.1 qualified single-mode module Segment LCD Drive QDID: 167535 LCD drive supported on all GPIOs (common or segment) Declaration ID: D054769 Operates in Deep-Sleep mode with four bits per pin memory Certified to FCC, CE, MIC, KC, and ISED regulations Serial Communication 32-bit processor (0.9 DMIPS/MHz) operating at up to 48 MHz Two independent runtime reconfigurable serial communication 2 blocks (SCBs) with I C, SPI, or UART functionality Watchdog timer with dedicated internal low-speed oscillator Timing and Pulse-Width Modulation Power Consumption Four 16-bit timer, counter, pulse-width modulator (TCPWM) TX output power: 18 dBm to +9.5 dBm blocks RX Receive Sensitivity: 95 dBm Center-aligned, Edge, and Pseudo-random modes Received signal strength indicator (RSSI) with 1-dB resolution Up to 25 Programmable GPIOs 1 Second connection interval with PA/LNA active: 26.3 A Any GPIO pin can be CapSense, LCD, analog, or digital TX current consumption: Two overvoltage-tolerant (OVT) pins drive modes, strengths, and slew rates are programmable Bluetooth LE silicon: 15.6 mA (radio only, 0 dBm) Notes 1. Connection range tested module-to-module in full line-of-sight environment, free of obstacles or interference sources with output power of +9.5 dBm. 2. Specified as EZ-BLE XT/XR module to module range. Mobile phone connection will decrease based on the PA/LNA performance of the mobile phone used. Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600 Document Number: 002-12524 Rev. *H Revised May 7, 2021