Please note that Cypress is an Infineon Technologies Company. The document following this cover page is marked as Cypress document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio. Continuity of document content The fact that Infineon offers the following product as part of the Infineon product portfolio does not lead to any changes to this document. Future revisions will occur when appropriate, and any changes will be set out on the document history page. Continuity of ordering part numbers Infineon continues to support existing part numbers. Please continue to use the ordering part numbers listed in the datasheet for ordering. www.infineon.com CYBT-3330xx-02 EZ-BT WICED Module CYBT-3330xx-02, EZ-BT WICED Module General Description The CYBT-3330xx-02 is a fully integrated Bluetooth Smart Ready wireless module. The CYBT-3330xx-02 includes an onboard crystal oscillator, passive components, flash memory, and the Cypress CYW20706 silicon device. Refer to the CYW20706 datasheet for additional details on the capabilities of the silicon device used in this module. The CYBT-3330xx-02 supports peripheral functions (ADC and PWM), UART, I2C, and SPI communication, and a PCM/I2S audio interface. The CYBT-3330xx-02 includes a royalty-free Bluetooth stack compatible with Bluetooth 5.0 in a 12.0 13.5 1.95 mm package. The CYBT-3330xx-02 includes 512 KB of onboard serial flash memory and is designed for standalone operation. The CYBT-3330xx-02 uses an integrated power amplifier to achieve Class I or Class II output power capability. The CYBT-3330xx-02 is offered in two certified versions. The CYBT-333032-02 supports an external antenna through an RF solder pad output. The CYBT-333047-02 supports an external antenna via a u-FL connector. Module Description Functional Capabilities Module size: 12.00 mm 13.50 mm 1.95 mm - ADC for audio (12 bits) and DC measurement (10 bits) 2 Bluetooth 5.0 Qualified Smart Ready module Serial Communications Interface compatible with I C slaves QDID: 131625 SPI support for both master and slave modes Declaration ID: D041935 HCI interface through UART Certified to FCC, ISED, MIC, and CE regulations PCM/I2S Audio interface Castelated solder pad connections for ease-of-use Two-wire Global Coexistence Interface (GCI) 512-KB on-module serial flash memory Integrated peripherals such as PWM, ADC Up to 11 GPIOs Programmable output power control Temperature range: 30 C to +85 C Supports extended synchronous connections (eSCO), for Arm Cortex -M3 32-bit processor enhanced voice quality by allowing for retransmission of dropped packets Maximum TX output power +12 dBm for Bluetooth Classic Bluetooth wideband speech support +9 dBm for Bluetooth Low Energy Bluetooth LE connection range of up to 250 meters at Benefits 1 9dBm CYBT-3330xx-02 provides all necessary components required to RX Receive Sensitivity: operate Bluetooth LE and/or BR/EDR communication standards. Bluetooth Classic: Proven hardware design ready to use 93.5 dBm at 1 Mbps, GFSK 95.5 dBm at 2 Mbps, /4-DQPSK Dual-mode operation eliminates the need for multiple modules 89.5 dBm at 3 Mbps, 8-DPSK Cost optimized for applications without space constraints 96.5 dBm for Bluetooth Low Energy Nonvolatile memory for self-sufficient operation and Power Consumption Over-the-air (OTA) updates Enhanced Data Rate (EDR) at 8 dBm Bluetooth SIG Listed with QDID and Declaration ID Peak TX current: 52.5 mA Fully certified module eliminates the time needed for design, Peak RX current consumption: 26.4 mA development and certification processes Bluetooth Low Energy at 0 dBm WICED STUDIO provides an easy-to-use integrated design 1-second interval Bluetooth LE ADV average current environment (IDE) to configure, develop, and program a consumption: 315 A Bluetooth application Low power mode support Deep Sleep: 2.69 A Note 1. Connection range tested module-to-module in full line-of-sight environment, free of obstacles or interference sources with output power of +9.0 dBm. Actual range will vary based on end product design, environment, receive sensitivity and transmit output power of the central device. Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600 Document Number: 002-25196 Rev. *B Revised December 15, 2020