Please note that Cypress is an Infineon Technologies Company. The document following this cover page is marked as Cypress document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio. Continuity of document content The fact that Infineon offers the following product as part of the Infineon product portfolio does not lead to any changes to this document. Future revisions will occur when appropriate, and any changes will be set out on the document history page. Continuity of ordering part numbers Infineon continues to support existing part numbers. Please continue to use the ordering part numbers listed in the datasheet for ordering. www.infineon.com CYBT-343026-01 EZ-BT WICED Module CYBT-343026-01 EZ-BT WICED Module Power Consumption General Description Enhanced Data Rate (EDR) at 8 dBm The CYBT-343026-01 is a fully integrated Bluetooth Smart Peak TX current: 52.5 mA Ready wireless module. The CYBT-343026-01 includes an Peak RX current consumption: 26.4 mA onboard crystal oscillator, passive components, flash memory, and the Cypress CYW20706 silicon device. Refer to the Bluetooth Low Energy at 0 dBm CYW20706 datasheet for additional details on the capabilities of 1-second interval Bluetooth LE ADV average current con- the silicon device used in this module. sumption: 315 A The CYBT-343026-01 supports peripheral functions (ADC and 2 2 Low power mode support PWM), UART, I C, and SPI communication, and a PCM/I S Deep Sleep: 2.69 A audio interface. The CYBT-343026-01 includes a royalty-free Bluetooth stack compatible with Bluetooth 5.0 in a 12.0 15.5 Functional Capabilities 1.95 mm package. - ADC for audio (12 bits) and DC measurement (10 bits) The CYBT-343026-01 includes 512 KB of onboard serial flash memory and is designed for standalone operation. The 2 Serial Communications interface compatible with I C slaves CYBT-343026-01 uses an integrated power amplifier to achieve Class I or Class II output power capability. Serial Peripheral Interface (SPI) support for both master and slave modes The CYBT-343026-01 is fully qualified by Bluetooth SIG and is targeted at applications requiring cost-optimized Bluetooth HCI interface through UART wireless connectivity. 2 PCM/I S Audio interface Module Description Two-wire Global Coexistence Interface (GCI) Module size: 12.00 mm 15.50 mm 1.95 mm Integrated peripherals such as PWM, ADC Bluetooth 5.0 Qualified Smart Ready module Programmable output power control QDID: 164447 Supports extended synchronous connections (eSCO), for Declaration ID: D054216 enhanced voice quality by allowing for retransmission of Certified to FCC, ISED, MIC, SRRC, KC, NCC, ANATEL, and dropped packets CE regulations Bluetooth wideband speech support Castelated solder pad connections for ease-of-use Benefits 512-KB on-module serial flash memory Up to 11 GPIOs CYBT-343026-01 provides all necessary components required to operate Bluetooth LE and/or BR/EDR communication Temperature range: 30 C to +85 C standards. Cortex-M3 32-bit processor Proven ready-to-use hardware design Maximum TX output power Dual-mode operation eliminates the need for multiple modules +12 dbm for Bluetooth Classic Cost optimized for applications without space constraints +9 dBm for Bluetooth Low Energy Bluetooth LE connection range of up to 250 meters at 9 Nonvolatile memory for self-sufficient operation and 1 dBm over-the-air updates RX Receive Sensitivity: Bluetooth SIG listed with QDID and Declaration ID Bluetooth Classic: Fully certified module eliminates the time needed for design, 93.5 dBm at 1 Mbps, GFSK development, and certification processes 95.5 dBm at 2 Mbps, /4-DQPSK WICED Studio provides an easy-to-use integrated design 89.5 dBm at 3 Mbps, 8-DPSK environment (IDE) to configure, develop, and program a 96.5 dBm for Bluetooth Low Energy Bluetooth application Note 1. Connection range tested module-to-module in full line-of-sight environment, free of obstacles or interference sources with output power of +9.0 dBm. Actual range will vary based on end product design, environment, receive sensitivity and transmit output power of the central device. Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600 Document Number: 002-19525 Rev. *H Revised March 1, 2021