Please note that Cypress is an Infineon Technologies Company. The document following this cover page is marked as Cypress document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio. Continuity of document content The fact that Infineon offers the following product as part of the Infineon product portfolio does not lead to any changes to this document. Future revisions will occur when appropriate, and any changes will be set out on the document history page. Continuity of ordering part numbers Infineon continues to support existing part numbers. Please continue to use the ordering part numbers listed in the datasheet for ordering. www.infineon.comEZ-PD CCG3 USB Type-C Port Controller General Description EZ-PD CCG3 is a highly integrated USB Type-C controller that complies with the latest USB Type-C and PD standards. EZ-PD CCG3 provides a complete USB Type-C and USB-Power Delivery port control solution for notebooks, dongles, monitors, docking stations and power adapters. CCG3 uses Cypresss proprietary M0S8 technology with a 32-bit, 48-MHz ARM Cortex -M0 processor with 128-KB flash, 8-KB SRAM, 20 GPIOs, full-speed USB device controller, a Crypto engine for authentication, a 20V-tolerant regulator, and a pair of FETs to switch a 5V (VCONN) supply, which powers cables. CCG3 also integrates two pairs of gate drivers to control external VBUS FETs and system level ESD protection. CCG3 is available in 40-QFN, 32-QFN, and 42-WLCSP packages. Clocks and Oscillators Features Integrated oscillator eliminating the need for external clock Type-C and USB-PD Support Power Integrated USB Power Delivery 3.0 support Integrated USB-PD BMC transceiver 2.7 V to 21.5 V operation Integrated VCONN FETs 2x Integrated dual-output gate drivers for external VBUS FET Configurable resistors R , R , and R switch control A P D Dead Battery Detection support Independent supply voltage pin for GPIO that allows 1.71 V to Integrated fast role swap and extended data messaging 5.5 V signaling on the I/Os Supports one USB Type-C port Reset: 30 A, Deep Sleep: 30 A, Sleep: 3.5 mA Integrated Hardware based overcurrent protection (OCP) and System-Level ESD Protection overvoltage protection (OVP) On CC, SBU, DPLUS, DMINUS and VBUS pins 32-bit MCU Subsystem 8-kV Contact Discharge and 15-kV Air Gap Discharge based 48-MHz ARM Cortex-M0 CPU on IEC61000-4-2 level 4C 128-KB Flash Packages 8-KB SRAM 40-pin QFN, 32-pin QFN, and 42-ball CSP for Integrated Digital Blocks Notebooks/Accessories Hardware Crypto block enables Authentication Supports industrial temperature range (40 C to +105 C) Full-Speed USB Device Controller supporting Billboard Device Class Integrated timers and counters to meet response times required by the USB-PD protocol Four run-time reconfigurable serial communication blocks 2 (SCBs) with reconfigurable I C, SPI, or UART functionality Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600 Document Number: 002-03288 Rev. *J Revised February 23, 2018