CYUSB301X/CYUSB201X EZ-USB FX3: SuperSpeed USB Controller EZ-USB FX3: SuperSpeed USB Controller Includes RTOS Framework (using ThreadX Version 5) Features Firmware examples covering all I/O modules Universal serial bus (USB) integration Visual Studio host examples using C++ and C USB 3.1, Gen 1 and USB 2.0 peripherals compliant with USB SuperSpeed Explorer Board available for rapid prototyping 3.1 Specification Revision 1.0 (TID 340800007) Several accessory boards also available: 5-Gbps SuperSpeed PHY compliant with USB 3.1 Gen 1 Adapter boards for Xilinx/Altera FPGA development High-speed On-The-Go (HS-OTG) host and peripheral Adapter board for Video development compliant with OTG Supplement Version 2.0 Thirty-two physical endpoints CPLD board for concept testing and initial development Support for battery charging Specification 1.1 and accessory Applications charger adaptor (ACA) detection General Programmable Interface (GPIF II) Digital video camcorders Programmable 100-MHz GPIF II enables connectivity to a Digital still cameras wide range of external devices 8-, 16-, 24-, and 32-bit data bus Printers Up to16 configurable control signals Scanners Fully accessible 32-bit CPU Video capture cards ARM926EJ core with 200-MHz operation Test and measurement equipment 512-KB or 256-KB embedded SRAM Additional connectivity to the following peripherals Surveillance cameras SPI master at up to 33 MHz Personal navigation devices UART support of up to 4 Mbps 2 Medical imaging devices I C master controller at 1 MHz 2 I S master (transmitter only) at sampling frequencies of Video IP phones 32 kHz, 44.1 kHz, and 48 kHz Portable media players Selectable clock input frequencies Industrial cameras 19.2, 26, 38.4, and 52 MHz 19.2-MHz crystal input support Data loggers Ultra low-power in core power-down mode Data acquisition Less than 60 A with VBATT on and 20 A with VBATT off High-performance Human Interface Devices (gesture Independent power domains for core and I/O recognition) Core operation at 1.2 V I2S, UART, and SPI operation at 1.8 to 3.3 V Functional Description 2 I C operation at 1.2 V to 3.3 V For a complete list of related documentation, click here. Package options 121-ball, 10- 10-mm, 0.8-mm pitch Pb-free ball grid array (BGA) See Table 20 for details on the seven FX3 variants EZ-USB Software Development Kit (SDK) for code devel- opment of firmware and PC Applications Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600 Document Number: 001-52136 Rev. *V Revised February 19, 2018CYUSB301X/CYUSB201X Logic Block Diagram Document Number: 001-52136 Rev. *V Page 2 of 53