PVDZ172NPbF Microelectronic Power IC HEXFET Power MOSFET Photovoltaic Relay Single-Pole, Normally-Open, 0-60V AC, 1.5A Features General Description The PVDZ172N Photovoltaic Relay is a single-pole, normally open solid state relay that can replace 250m On-Resistance electromechanical relays used for general purpose Bounce-Free Operation switching of DC loads. It utilizes International 1.5 Amp capacity Rectifiers HEXFET power MOSFET as the output 4,000 V I/O Isolation switch, driven by an integrated circuit photovoltaic RMS Solid-State Reliability generator of novel construction. The output switch is controlled by radiation from a GaAlAs light emitting UL recognized diode (LED) which is optically isolated from the ESD Tolerance: photovoltaic generator. 4000V Human Body Model These units overcome the limitations of both 500V Machine Model electromechanical and reed relays by offering the solid-state advantages of high sensitivity, miniaturization, no contact bounce, long operational life, insensitivity to external magnetic fields, shock and vibration, and high reliability inherent with solid state technology. They are ideally suited for switching high currents or low level signals without distortion or injection of electrical noise. These relays are packaged in 8-pin, molded DIP packages and available with thru-hole and surface- mount (gull-wing) leads, in plastic shipping tubes. Applications Portable Electronics Part Identification Programmable Logic Controllers Computers and Peripheral Devices PVDZ172NPbF thru-hole Audio Equipment PVDZ172NSPbF surface-mount Power Supplies and Power Distribution (gull-wing) PVDZ172NS-TPbF surface-mount, tape Instrumentation and reel (HEXFET is the registered trademark for International Rectifier Power MOSFETs) 1 www.irf.com 2015 International Rectifier Submit Datasheet Feedback April 29, 2015 PVDZ172NPbF Electrical Specifications (-40C T =+85C unless otherwise specified) A INPUT CHARACTERISTICS Limits Units Minimum Control Current (see figures 1 and 2) 10 mA Maximum Control Current for Off-State Resistance 0.4 mA T =+25C A Control Current Range (Caution: Current limit input LED, see figure 6) 5.0 to 25 mA Maximum Reverse Voltage 6.0 V OUTPUT CHARACTERISTICS Units Operating Voltage Range 0 to 60 V(DC) Maximum Load Current 40C (see figures 1 and 2) 1.5 A(DC) Maximum Pulsed Load Current TA=+25C (100 ms 10% duty cycle) 4.0 A(DC) Maximum Turn-On Time TA=+25C (see figure 7) 2.0 ms For 500mA, 50V Load, 10mA Control DC Maximum Turn-Off Time T =+25C (see figure 7) 0.5 ms A For 500mA, 50V Load, 10mA Control DC Maximum On State Resistance T =+25C(pulsed) (see figure 4) 250 m A 1.0A load, 10mA Control 8 Minimum Off State Resistance T =+25C 48 V (see figure 5) 10 Ohms A DC Minimum Off-State dv/dt 1000 V/s Output Capacitance (see figure 9) 150 pF 50 VDC GENERAL CHARACTERISTICS Limits Units Dielectric Strength, Input-Output 4000 V (RMS) 12 Insulation Resistance, Input-Output , 90 V 10 T =+25C - 50% RH DC A Capacitance, Input-Output 1.0 pF Lead Temperature (1.6mm below seating plane) for 10 seconds +260 C Ambient Temperature Range: Operating -40 to +85 C Storage -40 to +100 C International Rectifier does not recommend the use of this product in aerospace, avionics, military or life support applications. Users of this International Rectifier product in such applications assume all risks of such use and indemnify International Rectifier against all damages resulting from such use. 2 www.irf.com 2015 International Rectifier Submit Datasheet Feedback April 29, 2015