Series PVG612APbF Microelectronic Power IC HEXFET Power MOSFET Photovoltaic Relay Single-Pole, Normally-Open, 0-60V, 2.0A AC / 4.0A DC Features General Description The PVG612A Series Photovoltaic Relay is a Bounce-free operation single-pole, normally open solid-state relay that High load current capacity can replace electromechanical relays in many applications. It utilizes International Rectifiers High off-state resistance proprietary HEXFET power MOSFET as the output Linear AC/DC operation switch, driven by an integrated circuit photovoltaic 4,000 V I/O Isolation RMS generator of novel construction. The output switch Solid-State reliability is controlled by radiation from a GaAlAs light UL recognized emitting diode (LED) which is optically isolated ESD Tolerance: from the photovoltaic generator. 4000V Human Body Model These units exceed the performance capabilities 500V Machine Model of electromechanical relays in operating life, sensitivity, stability of on-resistance, miniaturization, insensitivity to magnetic fields and ruggedess. The compact PVG612A is particularly suited for isolated switching of high currents from 12 to 48 Volt AC or DC power sources. Series PVG612A Relays are packaged in a 6- pin, molded DIP package with either thru-hole or surface mount (gull-wing) terminals. It is available in standard plastic shipping tubes or on tape-and- reel. Please refer to Part Identification information opposite. Applications Programmable Logic Controllers Part Identification Computers and Peripheral Devices PVG612APbF thru-hole Audio Equipment PVG612ASPbF surface-mount Power Supplies and Power Distribution Control of Displays and Indicators PVG612AS-TPbF surface-mount, tape and reel Industrial Automation (HEXFET is the registered trademark for International Rectifier Power MOSFETs) 1 www.irf.com 2015 International Rectifier Submit Datasheet Feedback May 04, 2015Series PVG612APbF Electrical Specifications (-40C T +85C unless otherwise specified) A INPUT CHARACTERISTICS Limits Units Minimum Control Current (see figure 1) 5.0 mA Maximum Control Current for Off-State Resistance T = +25C 0.4 mA A Control Current Range (Caution: current limit input LED, see figure 6) 5.0 - 25 mA Maximum Reverse Voltage (1mA max.) 6.0 V OUTPUT CHARACTERISTICS Limits Units Operating Voltage Range 0 to 60 V (DC or AC peak) Maximum Continuous Load Current T = +40C, 10mA Control A (see figure 1) A Connection 2.0 A (AC or DC) B Connection 2.5 A (DC) C Connection 4.0 A (DC) Maximum Pulsed Load Current T +25C (100 ms 10% Duty Cycle) A = A Connection 7.5 A (AC or DC) B Connection 8.5 A (DC) C Connection 15.5 A (DC) Typical Thermal Resistance (Rthja, Junction-to-Ambient) A Connection 79.1 (C/W) B Connection 112.2 (C/W) C Connection 81.0 (C/W) Maximum On-State Resistance T =+25C A For 1A pulsed load, 10mA Control (see figure 4) A Connection 100 m B Connection 50 m C Connection 35 m Maximum Off-State Leakage 60V, TA =+25C 1.0 Maximum Turn-On Time TA =+25C (see figures 7 & 8) For 500mA, 50V load, 10mA Control, 10mS pulse width 3.5 ms DC Maximum Turn-Off Time TA =+25C (see figures 7 & 8) For 500mA, 50V load, 0.5 ms DC 10mA Control, 10mS pulse width Typical Output Capacitance Vdd=50V, f=1MHz (see figure 2) 105 pF GENERAL CHARACTERISTICS Limits Units Minimum Dielectric Strength, Input-Output 4000 V RMS 12 Minimum Insulation Resistance, Input-Output, T =+25C, 50%RH, 100V 10 A DC Maximum Capacitance, Input-Output 1.0 pF Maximum Pin Soldering Temperature (10 seconds maximum) +260 Ambient Temperature Range: Operating -40 to +85 C Storage -40 to +100 International Rectifier does not recommend the use of this product in aerospace, avionics, military or life support applications. Users of this International Rectifier product in such applications assume all risks of such use and indemnify International Rectifier against all damages resulting from such use. 2 www.irf.com 2015 International Rectifier Submit Datasheet Feedback May 04, 2015